In stock
R8 Brakes - "Original" Assembly (Page 2 sur 2)
In stock
In stock
Angled hose outlet: Ø 3/8" - 24UNF(Ø 9.52mm)
Suitable for:
4CV: Right Front Brake (Early 1956 to Late)
Dauphine / Floride : Left Front Brake
R8 (drum brake): Left Rear Brake
In stock
The hose outlet is oblique: Ø 3/8" - 24UNF(Ø 9.52mm)
Suitable for:
4CV: Front Left Brake (From early 1956 to late 1956)
Dauphine / Floride : Front Right Brake
R8 (Drum Brake): Rear Right Brake
In stock
Come with x3 aviation brake hoses to replace copper pipes
In stock
Master Cylinder Specifications:
Piston Diameter: Ø 22.2mm
Number of Outlets / Threads: x2 / M10x100
Number of Outlets / Threads: x2 / M12x100
Mounting Center Distance: 60mm
Master Cylinder Sold Individually
In stock
TRW paste is used for the repair, assembly, and preservation of hydraulic brake components, particularly brake calipers, which must be reassembled using special greases.
Compatible with all brake fluids for...
In stock
Delivery in France only
Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted...
In stock
In stock
ELF HTX 320 is a brake fluid for racing vehicles, based on glycol ether technology and designed to not retain atmospheric moisture.
Highly stable brake fluid at high temperatures (>320°C), with anti-corrosion...
In stock
Ideal for degreasing all your brake components or other mechanical parts.
Image for illustrative purposes only.
May vary depending on availability.
In stock
In stock
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
UNF thread tap (2B tolerance): Ø 3/8"-24 UNF (Right-hand thread)
Tap length (Overall): 63 mm
Mounting drive: 5.5 mm square
Flat end tap, suitable for: Through and blind holes
Machine tap: Only one tap is needed to...
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Suitable for die outer diameter: Ø 30mm
Die height: 10mm
Two-arm die holder made of high-quality steel
In stock
UNF die, DIN223 standard: Ø 3/8"-24 UNF (Right-hand thread)
Outer diameter of the die: Ø 30 mm
Die height: 11 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel / Aluminum...
In stock