Stainless steel windscreen clip - ref 6000000135

• Thread (master cylinder side): M16x150
• Nozzle (rubber hose connection side): Ø 10mm

Need 2 pieces

Delivery in France only

• Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted in the spring.
• DOT 5 approved (not to be confused with DOT 5.1)

Directions for use:

• Before using this brake fluid, your system must be thoroughly bled, rinsed with rubbing alcohol, and dried.

These twin-tube hydraulic adjustable shock absorbers are designed for versatile use, such as sporty driving.

With an adjustable damping range from softest to firmest,they are perfect for performance driving, sporty riding, or competition, while also offering the comfort and safety needed for everyday use.

Features:

• Mounting eye width: 21mm
• Lower mounting eye inner diameter: Ø 9mm
• The internal adjustment allows you to modify the rebound damping of the shock absorber.
• Shock absorbers delivered at minimum spring rate (fully open, i.e., softest setting)
• Shock absorbers sold in pairs

Suitable for:

• R8G (R1134 / R1135): From 10/1964 to 1974
• Alpine A110: 1100cc / 1300cc / 1600cc (All models except A110 SC / SX and SI)
• Alpine GT4 (For rear crossmember with 4 shock absorbers)
• Florida S and Caravelle:From 06/1964 onwards... (For rear crossmember with 4 shock absorbers)

Detailed description of Koni shock absorbers,see below