Best sellers
In stock
In stock
Stem Length: 38mm
Membrane Hole Spacing: 27mm
Cup Diameter 1: Ø 8.20 mm
Cup Diameter 2: Ø 10.20 mm
In stock
OE Renault Ref: 0852775600 / 0852957000 / 7703090181
In stock
In stock
Suitable for WEBER 40DCOE and 45DCOE carburettors
Sold individually, need 2 pieces for one carburettor
Number 58 on exploded view
Compatible with other WEBER carburettors, see below
In stock
In stock
A spring, supported within the cylinder casing, applies the chain tensioner to the chain.
Suitable for 810, 840, 845 and C1J engines
In stock
In stock
For filler necks with 1/4-turn locking tabs inside
Sold with cork gasket
In stock
Out of stock
In stock
In stock
Cooling Hose Compatible with Alpine:
A310.4 1600VE: From #1 to End of Series
A310.4 1600VF: From #1 to End of Series
A110 SC / Si (1600VD)
In stock
Cup diameter: Ø 10.10mm
In stock
In stock
The sets are supplied with the following components:
Liners (x4)
Pistons (x4)
Rings (x12)
Pin (x4)
Circle clips (x8)
Dimensions of the various parts:
Liner bore diameter: Ø 54.5mm
Liner flange or top diameter...
In stock
Allows quick and easy attachment of interior mats
Allows quick removal of mats for cleaning.
Kit includes a screw-on snap on the fixed part and a resealable claw clip on the removable part (mat side)
Invisible once...
In stock
Suitable for WEBER 40DCOE and 45DCOE
sold individually, need 2 pieces for one carburettor
Part number 46 on exploded view
Compatible with other WEBER carburettors, see below
In stock
In stock
Delivered without fuses
Dimensions: Lg 118mm x W 53mm x H 43mm - Fixing distance: 107mm
Out of stock
Out of stock
In stock
Compatible with versions:
Alpine A110 SC / Si (1600VD)
Alpine A110 SX (1600VH)
In stock
In stock
For mounting with banjo screws fixing on front and rear bracket M10x100 (x4)
Out of stock
Center distance of the cabochon fixing screws: 89mm
In stock
Suitable for:
A110.1600 VD and VH (SC / SI / SX)
A310.4 (All models)
A310 V6 (From number 1 to number 47709)
In stock
Bearing Dimensions:
Dimension: Repair dimension (+0.25)
Junnel Diameter (A): Ø 54.55mm
Housing Diameter (B): Ø 58.75mm
Bearing Width (C): 19.50mm
Bearing Thickness (D): 2.07mm
Smooth, lug-type bearings with grease...
In stock
In stock
Hose inner diameter: Ø 17mm
R4 (Billancourt Engine): R1120 / R1121 / R1122 / R1123 (From 01/1962)
OE Renault Ref: 0852841500 / 0857576900 / 7705026840
In stock
This kit is suitable for original Bendix transmitters
In stock
In stock
Inlet / outlet connection: BSP 1/2" x14 (x2)
Threaded sleeve: male Ø3/4" - 16UNF and female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the...
In stock
In stock
Built-in short extensions
Straight coil terminal
Coil wire length: 50cm
This ignition harness consists of 4 spark plug wires and 1 coil wire.
We would like to point out that our spark plug wires are made with 7 mm...
In stock
In stock
In stock
Out of stock
Threaded spigot diameter: M16x150
This assembly can be made from engine No. 958967 (early April 1960) on Ventoux Type 670 engines.
Out of stock
Harness for mounting with the coil on the left rear fender
Coil wire length: 63cm
Ignition wire length: 49cm / 53cm / 58cm / 62.5cm
This ignition harness consists of4 spark plug wires and 1 coil wire.
We would like...
In stock
Suitable for:
Juvaquatre R2100 (4hp): Type 662-3 engine
Dauphinois R2101 (5hp): Type 670-2 engine
In stock
In stock
Center distance of the cabochon fixing screws : 89mm
In stock
In stock
Diamond Dimensions:
Height:34mm
Width:22mm
Two mounting pins:Ø 3mm
Mounting center distance:18mm
Alpine OE Ref:0855869200 / 8558692
In stock
One pair of triangles is needed per side, so 2 pairs
In stock
Entered dimension of the collar: Ø 52mm
Diameter tube : Ø 32mm
In stock
Key Length: 56mm
Key Width: 23.5mm
Suitable for:
R5 Alpine (Coupe and Group 2): Front Brakes
R12G / R17G: Front Brakes
A310.4: Front and Rear Brakes
A310 V6 Before 1980 (#1 to #47708): Front and Rear Brakes
In stock
Suitable for boxes:
Boxes 369-02 / 369-04 / 369-09 / 369-10 / 369-15
NG5 gearbox
Box UN1
In stock
In stock
Connection thread: outgoing cone
Fixing distance: 25mm
In stock
Connection thread: outgoing cone
Fixing distance: 25mm
In stock