Curved front radiator grille - A110

• 4 spark plug wires + 1 coil wire
• Straight terminals on coil
• Length of coil cable: 61cm
• Length of 2 spark plug cables: 26.5cm
• Length of 2 spark plug cables: 36.5cm
• We would like to point out that our spark plug wires are made with Ø 7mm silicone wire and a standard copper core (wire material), they do not have interference protection.
• If the vehicle is equipped with sensitive electronic accessories, such as a radio, tripmaster, monitor, or certain kits electronic ignition, interference or disruption may occur.

These twin-tube hydraulic adjustable shock absorbers are designed for versatile use, such as sporty driving.

With an adjustable damping range from softest to firmest,they are perfect for performance driving, sporty riding, or competition, while also offering the comfort and safety needed for everyday use.

Features:

• Mounting eye width: 21mm
• Lower mounting eye inner diameter: Ø 9mm
• The internal adjustment allows you to modify the rebound damping of the shock absorber.
• Shock absorbers delivered at minimum spring rate (fully open, i.e., softest setting)
• Shock absorbers sold in pairs

Suitable for:

• R8G (R1134 / R1135): From 10/1964 to 1974
• Alpine A110: 1100cc / 1300cc / 1600cc (All models except A110 SC / SX and SI)
• Alpine GT4 (For rear crossmember with 4 shock absorbers)
• Florida S and Caravelle:From 06/1964 onwards... (For rear crossmember with 4 shock absorbers)

Detailed description of Koni shock absorbers,see below

Float weight: 12.5 grams

• Glass bowl Ø 67mm
• Filter element: Interchangeable paper cartridge
• One inlet: dual size 6 and 8mm
• One outlet: dual size 6 and 8mm
• Regulation pressure: Regulation range from 0 to 0.6 bar
• Compatible with fuel SP95 / SP98 / E85
• Pressure adjustment via the upper screw which acts directly on the membrane