Outer diameter: 260mm
Hub passage diameter: 60mm
Center distance of the 3 fixing holes: 71mm
Thickness: 8mm
Out of stock
Caravelle braking
Our braking spare parts for the Renault Caravelle
Discover here a wide choice of parts to restore and ensure the proper functioning of the braking system of your Renault Caravelle
Whether you are looking for wheel cylinders, hoses, master cylinders, brake discs, original brake calipers, big brake calipers, lockheed, reservoir, connector, stop switch, repair kit, copper braking circuit...at AVP, Arnaud Ventoux Pièces, you will find everything you need to bring your old one back to life with quality components.
Suitable for:
4CV: Drum brake (From 06/1953 until end of series)
Alpine A106: Drum brake
Dauphine (All models): Disc brake
Caravelle / Floride: Disc brake
R10 / R8 (All models): Disc brake
Alpine A110 and GT4: Disc...
In stock
Suitable for:
4CV: Drum brake (From 06/1953 until end of series)
Alpine A106: Drum brake
Dauphine (All models): Disc brake
Caravelle / Floride: Disc brake
R10 / R8 (All models): Disc brake
Alpine A110 and GT4: Disc...
In stock
4CV: Drum brake (From 06/1953 until end of series)
Alpine A106: Drum brake
Dauphine (All models): Disc brake
Caravelle / Florida: Disc brake
R10 / R8 (All models): Disc brake
Alpine A110 and GT4: Disc brake
Matradjet:...
In stock
In stock
Length taken from the axis of the fixing eye to the end of the rod: min adjustment 77mm / max 87mm
In stock
In stock
Length taken from the axis of the fixing eye to the end of the rod: min adjustment 105mm / max 115mm
In stock
End cap for stop switch Ø 12.5mm
Mounting using a long rod
In stock
In stock
Mounts with the stop switch reference 4423
In stock
Thread (master cylinder side): M16x150
Nozzle (rubber hose connection side): Ø 10mm
In stock
In stock
Master Cylinder Side (Male Thread): M16x150
Copper Pipe Fitting Side (Female Thread): Ø 1/2"-20 UNF (Ø 12.70mm)
In stock
In stock
Caliper equipped with square joint.
Fit on:
Dauphine (Disc brakes)
R8 / Caravelle / Floride S
A110 (Small brakes mounting)
In stock
Caliper equipped with square joint.
Fit on:
Dauphine (Disc brakes)
R8 / Caravelle / Floride S
A110 (Small brakes mounting)
Out of stock
Vendu sans vis de réglage, ni manette de frein à main . Etrier équipé de joint carré.
Se monte sur :
Dauphine (Freins à disques)
R8 / Caravelle / Floride S
A110 (Montage Petits freins)
In stock
Sold without adjustment screw, nor handbrake lever. Caliper equipped with square joint.
Fit on:
Dauphine (Disc brakes)
R8 / Caravelle / Floride S
A110 (Small brakes mounting)
In stock
In stock
This kit contains an M9 adjustment screw nut and an M8 nut.
Kit sold with a strong Ø 38mm square gasket and a weak Ø 38mm gasket.
The supply of these two seals allows you to install the most suitable seal depending...
In stock
This kit contains an M9 adjustment screw nut and an M8 nut.
To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
The "square" symbol indicates the presence of a...
In stock
This kit contains an M9 adjustment screw nut and an M8 nut
To identify a caliper with a square or round joint, refer to the symbol indicated on the caliper casting.
A square symbol indicates a square joint, while a...
In stock
This kit contains an M9 adjustment screw nut and an M8 nut
To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
A square symbol indicates a square seal, while a...
In stock
In stock
For a cable with a cable stop end: Ø 14mm
OE Renault Ref: 8704054 / 0870405400
In stock
In stock
In stock
In stock
In stock
In stock
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
In stock
Fully open position, release pressure 8 bars (+/- 5bars)
In stock
Sold complete with teat (inside Ø 6mm), insert, support and cap.
In stock
- Sold complete with support, brass cap, insert and rubber teat - Jar mounted with rubber teat Ø 6mm
In stock
In stock
In stock
In stock
In stock
In stock
Length 1 meter
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock