Steering and Front Axle R16

Our spare parts for the steering and front axle of your Renault R16

Access here a wide choice of parts to maintain or restore, overhaul the front axle or steering of your Renault R16

Whether you are looking for, steering rods, rack bellows, flexor, ball joint, bearing for stub axle, wishbone, silentbloc, stabilizer bar, support, noix de cardan, lower wishbone reinforcement, wishbone axle, castellated nut, hub cap, stud, shock absorber, spring...at AVP, Arnaud Ventoux Pièces, you will find everything you need to give your old car a new lease of life with quality components.

Read moreShow less

Home
>
Renault
>
R16
>
Steering and Front Axle R16

Set of two steering rods D and G - 1

Set of two steering rods D and G - 1

Set of two right and left steering rods

Reference: R16-61

€104.00 (tax incl.)

In stock

Original steering gaiter - R12 - 1

Original steering gaiter - R12 - 1

Original steering gaiter - R12

Reference: 8605

€7.00 (tax incl.)

In stock

Rack output ball joint and rear tie rod end - 1

Rack output ball joint and rear tie rod end - 1

Rack and pinion output ball joint or tie rod end ball joint Rear - M12x100 (Right hand thread) - Ref 7700504987

Suitable for: Eye end cap of rack and pinion - Ref 0824373600 / 7700504987 Front tie rod end cap or rear tie rod end cap - A110 - Ref 7700504987 Exhaust hanger - A310 V6 - Ref 7700504987 Inner diameter of the eye: Ø...

Reference: 4605

€16.00 (tax incl.)

In stock

Silent rack exit eye block - ref 7700509247 / 7702042315 - 1

Silent rack exit eye block - ref 7700509247 / 7702042315 - 1

Silent rack exit eye block - Ø 10x28x20x28mm - Réf 7700509247 / 7702042315

Reference: 4604

€3.50 (tax incl.)

In stock

Rack eye counter nut M12 - 1

Rack eye counter nut M12 - 1

M12 rack eye lock nut

Reference: 4615

€1.00 (tax incl.)

In stock

"Reinforced" steering flector - 1

"Reinforced" steering flector - 1

"Reinforced" steering flector

Reference: 2601

€6.50 (tax incl.)

In stock

Aluminum steering cardan nut - Ø8mm of the 2 screws and center distance 20mm - 1

Aluminum steering cardan nut - Ø8mm of the 2 screws and center distance 20mm - 1

Aluminum steering cardan nut - Ø8mm of the 2 screws and 20mm center distance

Reference: 5657

€7.00 (tax incl.)

In stock

Aluminum steering cardan nut - Ø9mm of the 2 screws and center distance 23mm - 1

Aluminum steering cardan nut - Ø9mm of the 2 screws and center distance 23mm - 1

Aluminum steering cardan nut - Ø9mm of the 2 screws and 23mm center distance

Reference: 5651

€7.00 (tax incl.)

In stock

Bottom bracket axle stop clip - Ref 6071079 / 0607107900

Bottom bracket axle stop clip - Ref 6071079 / 0607107900

Bottom bracket axle stop clip - Ref 6071079 / 0607107900

Reference: 43014

€4.50 (tax incl.)

In stock

Upper Right or Left Suspension Ball Joint (M10x125 Axle - Cone Ø 11.60mm to Ø 13mm) - R4 (From 1965 to 1969) / R16 - 1

Upper Right or Left Suspension Ball Joint (M10x125 Axle - Cone Ø 11.60mm to Ø 13mm) - R4 (From 1965 to 1969) / R16 - 1

Upper Right or Left Suspension Ball Joint (M10x125 Axle - Cone Ø 11.60mm to Ø 13mm) - R16 (TS and TL)

Ball joint: M10x125 axle - Cone Ø 11.60mm to Ø 13mm Center distance between wishbone mounting: 42mm and 48mm Ball joint mounting diameter: 38mm Renault OE Ref: 0996064400 Suitable for: R16 TS (R1151): From start to...

Reference: R16-63

€37.00 (tax incl.)

In stock

Upper ball joint ref 7701451902 - Ø nut 12mm - 1

Upper ball joint ref 7701451902 - Ø nut 12mm - 1

Upper Right or Left Suspension Ball Joint (M12x125 Axle - Cone Ø 12.5mm to Ø 13.5mm) - Ref 7701451902

Suspension ball joints: M12x125 axle - Cone Ø 12.5mm to Ø 13.5mm Mounting center distance on the wishbone: 42.5mm and 48.5mm Suitable for: R16 TS (R1151): From no. 24717 to end of series R16 TL (R1152): From no....

Reference: R16-64

€27.00 (tax incl.)

In stock

Lower ball joint ref 7701453022 - 2

Lower ball joint ref 7701453022 - 2

Right or Left Lower Ball Joint (M12x125 Axis - Cone Ø 15mm to Ø 17.5mm) - R16 (All models) - Ref 7701453022

Suspension ball joints: M12x125 axle - Cone Ø 15mm to Ø 17.5mm Mounting center distance on the wishbone: 46mm and 54mm

Reference: R16-62

€27.00 (tax incl.)

In stock

Upper wishbone axle nut - ref 8083111252 / ref 7703034005 - 1

Upper wishbone axle nut - ref 8083111252 / ref 7703034005 - 1

Upper wishbone axle or lower or upper suspension ball joint nut M12x125 - ref 8083111252 / 7703034005

Reference: 4344

€1.50 (tax incl.)

In stock

Pair of Front Shock Absorbers - R16 (all models from 1964 to 1981) - 1

Pair of Front Shock Absorbers - R16 (all models from 1964 to 1981) - 1

Pair of Front Shock Absorbers - R16 (all models from 1964 to 1981)

Reference: 16302

€180.00 (tax incl.)

In stock

Front / Rear wheel stud - M12x125 Length 33mm - Ref 05 54 732 800

Front / Rear wheel stud - M12x125 Length 33mm - Ref 05 54 732 800

Front / Rear wheel stud - M12x125 Length 33mm - Ref 05 54 732 800

Reference: 4386

€5.00 (tax incl.)

In stock

Front / Rear wheel stud - M12x125 Length 36mm - ref 05 56 059 500 - 1

Front / Rear wheel stud - M12x125 Length 36mm - ref 05 56 059 500 - 1

Front / Rear wheel stud - M12x125 Length 36mm - ref 05 56 059 500

Reference: 8325

€5.00 (tax incl.)

In stock

Front wheel bearing kit - 35x72x21 and 35x72x17 - R12G / R16 / R17G

Front wheel bearing kit - 35x72x21 and 35x72x17 - R12G / R16 / R17G

Front wheel bearing kit - 35x72x21 and 35x72x17 - R12G / R16 / R17G

Reference: 8312

€93.00 (tax incl.)

In stock

Rubber silent block stabilizer bar end (all models) - Ø10x25x17 - 1

Rubber silent block stabilizer bar end (all models) - Ø10x25x17 - 1

Rubber silentblock at the end of the stabilizer bar (all models) - Ø10x25x17

Reference: 6316

€1.00 (tax incl.)

In stock

Left engine support - A110 SC et SI / A310.4 / R16 - Réf 0830049200 - 1

Left engine support - A110 SC et SI / A310.4 / R16 - Réf 0830049200 - 1

Left engine support - A110 SC et SI / A310.4 / R16 - Réf 0830049200

Reference: 6312

€46.00 (tax incl.)

In stock

Right engine support - A110 SC et SI / A310.4 / R16 - Réf 0830049300 - 1

Right engine support - A110 SC et SI / A310.4 / R16 - Réf 0830049300 - 1

Right engine support - A110 SC et SI / A310.4 / R16 - Réf 0830049300

Reference: 6314

€46.00 (tax incl.)

In stock

Gearbox support (right or left) - ref 6000056200 / 7700557330 - 1

Gearbox support (right or left) - ref 6000056200 / 7700557330 - 1

Gearbox support (right or left) - ref 6000056200 / 7700557330

Reference: 5344

€45.00 (tax incl.)

Out of stock

Axle shaft repair gaiter - gearbox side - Ø 53 and Ø53mm - 1

Axle shaft repair gaiter - gearbox side - Ø 53 and Ø53mm - 1

Cardan joint gaiter on the gearbox side - Ø 53x53x125mm - Ref 7701000986

Reference: 5322

€13.50 (tax incl.)

In stock

Wheel side universal joint gaiter - Ø 23x78x135mm - Ref 7701457539

Wheel side universal joint gaiter - Ø 23x78x135mm - Ref 7701457539

Wheel side universal joint gaiter - Ø 23x78x135mm - Ref 7701457539

Reference: 5321

€12.00 (tax incl.)

In stock

Transmission or Cardan Grease (MoS2 Type) - 1

Transmission or Cardan Grease (MoS2 Type) - 1

Transmission or Cardan Grease (MoS2 Type)

Original CV Joint Grease Capacity 90ml (80 grams)

Reference: C114

€4.00 (tax incl.)

In stock

Spray copper grease - 1

Spray copper grease - 1

Spray copper grease

Delivery only in France

Reference: C013

€19.00 (tax incl.)

In stock

Multipurpose grease (rolling, bearing, etc.) - 1

Multipurpose grease (rolling, bearing, etc.) - 1

Multipurpose grease (bearing, bearing, etc.)

Reference: C027

€9.00 (tax incl.)

In stock

Straight grease nipple - M6x100 - 1

Straight grease nipple - M6x100 - 1

Straight grease nipple - M6x100

Grease nipple with steel ball Grease nipple (overall) height: 15.20 mm Grease nipple with a 7 key recess

Reference: C107

€1.00 (tax incl.)

In stock

Straight Grease Nipple (Short) - M6x100 - 1

Straight Grease Nipple (Short) - M6x100 - 1

Straight Grease Nipple (Short) - M6x100

Grease nipple with steel ball Grease nipple (overall) height: 13.60 mm Grease nipple with a 7 mm key

Reference: C108

€1.00 (tax incl.)

In stock

45° grease nipple - M6x100 - 1

45° grease nipple - M6x100 - 1

45° grease nipple - M6x100

Grease nipple with steel ball Grease nipple (overall) height: 25mm Grease nipple with an 11mm key

Reference: C109

€1.50 (tax incl.)

In stock

90° Grease Nipple - M6x100 - 1

90° Grease Nipple - M6x100 - 1

90° Grease Nipple - M6x100

Grease nipple with steel ball Grease nipple (overall) height: 18mm Grease nipple with a 9 key

Reference: C110

€1.50 (tax incl.)

In stock

Straight grease nipple - M8x125 - 1

Straight grease nipple - M8x125 - 1

Straight grease nipple - M8x125

Grease nipple with steel ball Grease nipple (overall) height: 15.5 mm Grease nipple with a 9 key

Reference: C111

€1.50 (tax incl.)

In stock

45° Grease Nipple - M8x125 - 1

45° Grease Nipple - M8x125 - 1

45° Grease Nipple - M8x125

Grease nipple with steel ball Grease nipple (overall) height: 24mm Grease nipple with a 9 key

Reference: C112

€2.00 (tax incl.)

In stock

90° Grease Nipple - M8x125 - 1

90° Grease Nipple - M8x125 - 1

90° Grease Nipple - M8x125

Grease nipple with steel ball Grease nipple (overall) height: 18mm Grease nipple with a 9 key

Reference: C113

€2.00 (tax incl.)

In stock

Hex cross key (Size 17,19, 22mm & 13/16") - 1

Hex cross key (Size 17,19, 22mm & 13/16") - 1

Hex cross key (Size 17,19, 22mm & 13/16")

Reference: T006

€19.00 (tax incl.)

In stock

Ball joint extractor (Fork Ø20mm) - 1

Ball joint extractor (Fork Ø20mm) - 1

Ball joint extractor (Fork Ø20mm)

Reference: T005

€50.00 (tax incl.)

Out of stock

Oiler assortment (110 pieces) - 1

Oiler assortment (110 pieces) - 1

Oiler assortment (110 pieces)

Reference: C039

€39.00 (tax incl.)

In stock

Assortment of internal circlips - 1

Assortment of internal circlips - 1

Assortment of internal circlips

Reference: C040

€15.50 (tax incl.)

In stock

Assortment of external circlips (300 pieces) - 1

Assortment of external circlips (300 pieces) - 1

Assortment of external circlips (300 pieces)

Reference: C041

€15.50 (tax incl.)

In stock

Assortment of industrial meca pins (450 pcs) - 1

Assortment of industrial meca pins (450 pcs) - 1

Assortment of mechanical pins (450 pcs)

Box of cotter pins (450 pieces)

Reference: C042

€39.00 (tax incl.)

In stock

Cotter pin assortment (550 pieces) - 1

Cotter pin assortment (550 pieces) - 1

Cotter pin assortment (550 pieces)

Reference: C043

€17.50 (tax incl.)

In stock

Assortment of locking nuts - M4, M5, M6, M8 & M12 - 146 pieces - 1

Assortment of locking nuts - M4, M5, M6, M8 & M12 - 146 pieces - 1

Assortment of locking nuts - M4, M5, M6, M8 & M12 - 146 pieces

Reference: C044

€16.00 (tax incl.)

In stock

1

Left column

Top

Please sign in first.

Sign in