In stock
Engine and Transmission Performance R5 / R5 Alpine Atmo / R5 Alpine Turbo
Our performance and Racing spare parts for your R5 / R5 Alpine Atmo / R5 Alpine Turbo.
Discover here a wide selection of parts and accessories designed to improve and boost the engine performance of your R5 / R5 Alpine Atmo / R5 Alpine Turbo.
Whether you are looking for electronic ignition, iridium spark plugs, a sports-prepared camshaft, oil pan, exhaust manifold, sports silencer...at AVP, Arnaud Ventoux Pièces, you will find everything you need for optimize the operation of your old one with quality components.
Dimensions of the Large Spring:
Outer Diameter: Ø 33.3mm
Inner Diameter: Ø 25mm
Wire Diameter: Ø 4.1mm
Free Height (overall): 44.40mm
Dimensions of the Small Spring:
Outer Diameter: Ø 23.3mm
Inner Diameter: Ø...
In stock
To replace the 3/4"-16UNF oil filter with a M20x150 filter
Thread on engine block side: 3/4"-16UNF
Thread on filter side: M20x150
Overall length: 50mm
In stock
Please note: This oil pump is not suitable as a replacement for an original oil pump in an original sheet metal oil pan for 1255cc and 1296cc engines.
Height from the oil pump mating surface to the bottom of the...
In stock
Inlet / outlet connection: BSP 1/2" x14 (x2)
Threaded sleeve: male Ø3/4" - 16UNF and female Ø3/4" - 16UNF
Please note, the oil filter plate does not correspond to the original hoses and fittings. Provide for the...
In stock
Thread Dimensions:
Male Ø 3/4" - 16UNF
Female Ø 3/4" - 16UNF
Overall Length: 45mm
In stock
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and...
In stock
Please note this hose cannot replace the original oil hoses, use only to carry out an adaptable assembly using a connector and a new radiator.
Material: Black synthetic braid
Maximum operating pressure 35 bar and...
In stock
In stock
In stock
In stock
In stock
Out of stock
In stock
Out of stock
In stock
Ideal for prepared engines or to replace a mechanical fuel pump.
Flow rate: 125l/h
Max pressure: 0.30bar
Suction: -0.10bar
220° adjustable inlet and outlet tube: Ø 8mm
Self-regulated fuel pump
Dimensions: 73x126mm /...
In stock
Ideal for prepared engines or to replace a mechanical fuel pump.
Flow rate: 130l/h
Max pressure: 0.15bar
Suction: -0.20bar
220° adjustable inlet and outlet tube: Ø 8mm
Self-regulated fuel pump
Dimensions: 73x126mm...
In stock
In stock
In stock
Suitable for: R4 TL (72-77)
R5 L (79-84) / TL GTL (79-85)
R5 Campus and Super Campus
In stock
This igniter is suitable for:
R5 Alpine (R1223)
Igniter to be used with a coil with a primary resistance of 2.5 to 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Instructions included
In stock
4 spark plug wires + 1 coil wire
Terminals on coil straight
Length of coil cable: 61cm
Length of 2 spark plug cables: 26.5cm
Length of 2 spark plug cables: 36.5cm
We would like to point out that our spark plug wires...
In stock
4 spark plug wires + 1 coil wire
Straight terminals on coil
Length of coil cable: 61cm
Length of 2 spark plug wires: 26.5cm
Length of 2 spark plug wires: 36.5cm
We would like to point out that our spark plug wires...
In stock
4 spark plug wires + 1 coil wire
90° angled coil terminals
Coil cable length: 61cm
2 spark plug wire length: 26.5cm
2 spark plug wire length: 36.5cm
We would like to point out that our spark plug wires are made with...
In stock
4 spark plug wires + 1 coil wire
90° angled coil terminals
Coil cable length: 61cm
2 spark plug wire length: 26.5cm
2 spark plug wire length: 36.5cm
We would like to point out that our spark plug wires are made with...
In stock
In stock