Kit of 2 oil pump seals (paper and plastic)

1000/R1/R2/R3/Coupe 1000/1200S/CG

Suitable for valves with a groove in the upper position (type KK) and for stem diameter 8mm

Bearing Dimensions:

• Dimension: Repair Dimension (+0.20)
• Journal Diameter (A): Ø 51.77mm
• Housing Diameter (B): Ø 55.88mm
• Bearing Width (C): 18.68mm
• Bearing Width (C): 24.68mm
• Bearing Thickness (D): 2.02mm
• Smooth, lug-type bearings with grease holes (x7) and grooves (x7)
• Bearing material:Bi-metal

• • Hose inner diameter (Thermostat side): Ø 32mm
  • Hose inner diameter (Radiator side): Ø 25mm
  • Simca OE part number: 29500H

Suitable for:

• • • Simca 1000 LS / GL / GLS (From 1968): Engine 349 / 349S / 351
    • Simca 1000 Coupé
    • Simca 1000 Rallye: Engine 351
    • Simca 1000 Rally 1: Engine 371

• Supplied with 4 carburetor mounting studs
• Carburetor mounting stud distance: 110mm and 70mm

The carburetor is mounted directly onto the manifold. A seal is ensured by two paper gaskets; there is no need to use flexible or rigid flanges.

The AVP9215 water pipe is required in addition to the intake manifold.The original cooling system runs through the original intake manifold; if it is removed, the water circulation will be interrupted.

• Delivery in France only
• Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
• Resistant to 180°C
• Capacity: 500ml
• Color: RAL 6005 green
• Applicable directly with a brush or spray gun by diluting the paint with thinner reference C024.