Out of stock
Braking R5 Turbo 1 / R5 Turbo 2
Our braking spare parts for the Renault R5 Turbo 1 / R5 Turbo 2
Discover here a wide range of parts to restore and ensure the proper functioning of the braking system of your Renault R5 Turbo 1 / R5 Turbo 2
Whether you are looking for: hoses, master cylinder, brake disc, lockheed, reservoir, connector, stop switch, repair kit, copper braking circuit...at AVP, Arnaud Ventoux Pièces, you will find everything you need to bring your braking system back to life to your old one with quality components.
Suitable for:
A310.6: Front and rear disc - After 1980 (n°47709 at the end of the series)
R5 Turbo: Front and rear disc
In stock
In stock
Suitable for:
R5 Turbo 1 and 2 (8220)
A310 V6 - After 1980(From #47709 to the end of the series)
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502): Rear brake caliper
Kit contents:
Spring clips: x4
Retaining...
Out of stock
In stock
In stock
Out of stock
In stock
In stock
Out of stock
In stock
In stock
In stock
In stock
ELF HTX 320 is a brake fluid for racing vehicles, based on glycol ether technology and designed to not retain atmospheric moisture.
Highly stable brake fluid at high temperatures (>320°C), with anti-corrosion...
In stock
Delivery in France only
Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted...
In stock
Ideal for degreasing all your braking elements or other mechanical parts.
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
UNF thread tap (2B tolerance): Ø 3/8"-24 UNF (Right-hand thread)
Tap length (Overall): 63 mm
Mounting drive: 5.5 mm square
Flat end tap, suitable for: Through and blind holes
Machine tap: Only one tap is needed to...
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Suitable for die outer diameter: Ø 30mm
Die height: 10mm
Two-arm die holder made of high-quality steel
In stock
UNF die, DIN223 standard: Ø 3/8"-24 UNF (Right-hand thread)
Outer diameter of the die: Ø 30 mm
Die height: 11 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel / Aluminum...
In stock