Click for more products.
No products were found.
Click for more products.
No products were found.
×
Set of front or rear brake pads (Bendix mounting) - Ferodo Racing (DS3000) - Competition use - 1
Set of front or rear brake pads (Bendix mounting) - Ferodo Racing (DS3000) - Competition use - 2
Set of front or rear brake pads (Bendix mounting) - Ferodo Racing (DS3000) - Competition use - 1
Set of front or rear brake pads (Bendix mounting) - Ferodo Racing (DS3000) - Competition use - 2
Set of front or rear brake pads (Bendix mounting) - Ferodo Racing (DS3000) - Competition use - 1
Set of front or rear brake pads (Bendix mounting) - Ferodo Racing (DS3000) - Competition use - 2

Set of front or rear brake pads (Bendix mounting) - Ferodo Racing (DS3000) - Competition use

Reference:
5411

Suitable for the following vehicles:

  • R5 / SUPER 5 / R9 / R11 / R18 / R19 / R21: Front Brakes
  • Clio 1.8-16V: Front Brakes
  • Alpine GTA (V6 GT and V6 Turbo): Rear Brakes

Brake Pad Dimensions:

  • Width: 105mm
  • Height: 54mm
  • Thickness: 18mm

For competition use only. Do not use these brake pads on public roads.

Read moreShow less
€161.00 (tax incl.)
Order before 1pm and enjoy same day shipping !
In stock
Product Details
5411
You may also like
Rear Brake Pad Set (Bendix Mounting) - Ferodo racing (DS 2500) - Competition use - 1 Rear Brake Pad Set (Bendix Mounting) - Ferodo racing (DS 2500) - Competition use - 1

Suitable for:

  • R8 / A110: Rear Big Brake Assembly
  • R5 Alpine Turbo (122B): Rear Brake
  • A310.4: Rear Brake
  • A310 V6 (Pre-1980): Rear Brake
  • R12G / R17G: Rear Brake

Brake pads with a retaining stop (B in the diagram) must be installed with this stop facing forward (in the direction of wheel rotation).

For competition use only. Do not use these brake pads on public roads.

Reference: 4470
€138.00 (tax incl.)
Add to cart
In stock
Front brake pad set (Bendix assembly) - Ferodo racing (DS 3000) - Competition use - 1 Front brake pad set (Bendix assembly) - Ferodo racing (DS 3000) - Competition use - 1

Suitable for:

    • R8 / A110: Front Big Brakes
    • R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brakes
    • A310.4: Front Brakes
    • A310 V6 (Pre-1980): Front Brakes
    • R12 (All models): Front Brakes
    • R15 / R16 / R17 (All models): Front Brakes

Brake pads with a retaining stop (B in the diagram) must be fitted with this stop facing forward (in the direction of wheel rotation).

For competition use only. Do not use these brake pads on the track. public.

Reference: 4447
€142.00 (tax incl.)
Add to cart
In stock
Customers who bought this product also bought:
Tube of brake grease - 25gr - 1 Tube of brake grease - 25gr - 1

  • TRW paste is used for the repair, assembly, and preservation of hydraulic brake components, particularly brake calipers, which must be reassembled using special greases.
  • Compatible with all brake fluids for assembling seals and Everything that comes into contact with brake fluid: master cylinder, wheel cylinder.

Reference: C074
€8.50 (tax incl.)
Add to cart
In stock
Two-component cold-mix epoxy paint - Satin Black - RAL9005 With Thinner - 1 Two-component cold-mix epoxy paint - Satin Black - RAL9005 With Thinner - 1
NEW

    • Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs.
    • Temperature resistant up to 200°C, allowing you to paint your drums, brake calipers, engine compartment, etc.
    • Its anti-corrosion properties allow it to be applied directly to the metal without a primer.
    • Excellent adhesion to bare metal, steel, aluminum, magnesium, yellow metals, galvanized steel, and plastics with the use of an adhesion primer.
    • Flexible paint, suitable for painting springs.
    • Resistant to drips from: Antifreeze, oils, fuels, battery acid, most brake fluids...

Reference: C131
€65.00 (tax incl.)
Add to cart
In stock
Front brake pad set (Lucas assembly) - Normal use - 1 Front brake pad set (Lucas assembly) - Normal use - 1

Suitable for the following vehicles:

  • R5 / R11 / R18 / R19 / R21: Front Brakes
  • Super 5 GT Turbo: Front Brakes
  • Alpine GTA: Front Brakes

Brake Pad Dimensions:

  • Width: 100mm
  • Height: 65mm
  • Thickness: 18mm
Reference: 5433
€27.00 (tax incl.)
Add to cart
In stock
1

Please sign in first.

Sign in