In stock
Best sellers
Suspension ball joints: M12x125 axle - Cone Ø 12.50mm to Ø 14mm
Mounting center distance on the wishbone: 42mm and 51mm
OE Renault Ref: 7701450637 / 7701461162
In stock
Suitable for:
R8 / A110 : Rear Brake (Big Brake Type Mounting)
A310.4 (All Models) : Rear Brake
A310 V6 (Before 1980) : Rear Brake
In stock
Male / female connection: 3/8" - 24UNF
In stock
In stock
Suitable for:
R8 / R8G / A110 : Front or rear disc (Big brake assembly)
A110 1600 SX (VH) : Front or rear disc
R16 (L / TL / TS) / R16TX : Front disc
A310.4 (No. 910 at the end of the series): Front disc
A310 V6 -...
In stock
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 9005 BLACK
Applicable directly with a brush or spray gun by diluting...
In stock
Identical to the YORKA and SEIMA branded caps
Out of stock
Distance between two pulley mounting screws: 37mm
Pulley mounting using 3 x M8 screws (Not supplied)
The heater outlets can be plugged using two 16mm diameter rubber plugs and one 10mm diameter plug
Water pump sold...
In stock
In stock
In stock
In stock
Bearing Dimensions:
Dimension: Repair Dimension (+0.25)
Junnel Diameter (A): Ø 45.75mm
Housing Diameter (B): Ø 49.89mm
Bearing Width (C): 24.50mm (x4)
Bearing Width (C): 19.50mm (x6)
Bearing Thickness (D): 2.04mm...
In stock
In stock
In stock
In stock
In stock
In stock
Mounting with AVP4981 screws
In stock
For Renault 8 / Caravelle / Alpine A108 and Alpine GT4.
Overall length: 255.5 cm
Sheath length: 191 cm
Cable length: 244.5 cm
Our cables are made in France and meet the assembly and quality standards of original...
In stock
In stock
In stock
Seal Dimensions:
Inner Diameter: Ø 22mm
Outer Diameter: Ø 32.8mm
Height (excluding lugs): 6.2mm
Recessed Diameter: Ø 26.5mm
Push Button Diameter: Ø 21.5mm
In stock
In stock
In stock
In stock
In stock
In stock
In stock
Attention mounting distance on Peugeot / Citroën cylinder head
Fixing center distance on the cylinder head side 142mm and 38mm
Mounting distance on the carburettor side 110mm and 70mm
Comes with these O-rings (x4)
In stock
In stock
In stock
In stock
In stock
Fuel banjo bolt diameter: M12x100
Suitable for vehicles:
A110 1600 SX (VD) and SC (VH)
A310.4: From chassis no. 635 to end of series (2nd model)
In stock
In stock
In stock
For 4-speed gearbox (Type 330)
Overall length: 191.5 cm
Sheath length 1: 80 cm
Sheath length 2: 82 cm
Cable length: 189 cm
Cable end diameter: Ø 11 mm
Cable supplied with square cable ends
Renault OE part number:...
In stock
1000 / R1 / R2 / R3 / Coupe 1000 / 1200S
In stock
In stock
In stock
In stock
In stock
Suitable for vehicles:
R12
R15 / R17
A310.4: VF and VE (From chassis no. 910 to the end)
A310 V6
In stock
4 spark plug wires + 1 coil wire
90° angled coil terminals
Length of coil cable: 61cm
Length of 2 spark plug wires: 26.5cm
Length of 2 spark plug wires: 36.5cm
We would like to point out that our spark plug wires are...
In stock
Réf OE Renault : 0855812900 / 7703067259
In stock
In stock
Out of stock
This kit is suitable for various Solex 35 PHH E-4 / 35 PHH E-6 / 35 PHH E-7 / 35 PHH E-7A models
The kit contains 2 small square diaphragms (4 holes) and 2 large accelerator pump diaphragms featuring 6 mounting...
In stock
1000 / R1 / R2 / R3 / Coupe 1000 / 1200S
In stock
Drilling for fixing: x3 hole Ø 8.5mm
In stock
Out of stock
To turn on a temperature warning light
Trigger temperature 115°C
Out of stock
In stock
In stock
Intake manifold mounting distance: 70mm and 110mm
Carburetor mounting distance: 110mm and 70mm
Flange thickness: 19.3mm
Pipes diameter: Ø 45mm
Flanges supplied with O-rings (x4), paper gaskets (x4), and mounting...
In stock
In stock