Click for more products.
No products were found.
Click for more products.
No products were found.
×
Complete engine gasket kit (76mm bore) - 1398cc engine (Type 847 and C1J) - R18 / A110 FASA - 1
NEW
Complete engine gasket kit (76mm bore) - 1398cc engine (Type 847 and C1J) - R18 / A110 FASA - 1
Complete engine gasket kit (76mm bore) - 1398cc engine (Type 847 and C1J) - R18 / A110 FASA - 1

Complete engine gasket kit (76mm bore) - 1398cc engine (Type 847 and C1J) - R18 / A110 FASA

Reference:
18002

Suitable for:

  • R18 TL or GTL: 1397cc engine (Type 847-00 / 847-01 / 874-22)
  • Alpine A110 FASA: 1397cc engine
  • Trafic: 1397cc engine (Type C1J 700)
Read moreShow less
€76.00 (tax incl.)
Order before 1pm and enjoy same day shipping !
In stock
Product Details
18002
You may also like
Set of 4 pistons and 4 liners Ø 76mm with rings and pins (Ø 20x63.5mm) - 1397cm³ engine (Type 847.20, C1J...) - R5 (TS / TX) - 1 Set of 4 pistons and 4 liners Ø 76mm with rings and pins (Ø 20x63.5mm) - 1397cm³ engine (Type 847.20, C1J...) - R5 (TS / TX) - 1

Suitable for vehicles with 1397cc engines (Type 847.20, C1J, C2J, C3J):

    • R5 TS / TX / GTL / Automatic / USA
    • R11 L / TL / TLE
    • R18 TL / GTL
    • Fuego / Express

Kits are supplied with the following:

    • Cylinder Cylinders (x4)
    • Pistons (x4)
    • Ring Rings (x12)
    • Crankshafts (x4)

Dimensions of the different parts:

  • Bore diameter of the cylinder liners: Ø 76mm
  • Flange or top diameter of the cylinder liners (D): Ø 90.10mm
  • Base diameter of the cylinder liners (A): Ø 80.60mm
  • Overall height of the cylinder liners (C), including skirts: 134mm
  • Height from the top of the cylinder liner to the base gasket area (E): 95mm
  • Dimensions of the shafts: Ø 20 x 63.50 mm (Cirlip-free mounting)
  • Segment thickness: 1.75 mm / 2 mm / 4 mm (Fireproof/Sealing/Scraper)
  • Base gasket type: O-ring

Piston mounting direction: an arrow drawn perpendicular to the piston axis is shown on the top of the piston. It must be oriented in the direction of engine rotation during the connecting rod's downward stroke (see manufacturer's instructions or diagram).

It is essential to check the ring end gap of each piston ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the supplied instructions.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120° intervals. 

Reference: 5099
€430.00 (tax incl.)
Add to cart
In stock
Customers who bought this product also bought:
Spark plug NGK - R5A (1223) / A310.6 - 1 Spark plug NGK - R5A (1223) / A310.6 - 1

Suitable for the following vehicles:

  • R5 Alpine Atmo (R1223)
  • R14: From 06/1983
  • R18 GTX: From 02/1986
  • R20 LS / TS / TX: From 12/1983
  • R21 (J6R): From 03/1986 to 12/1995
  • R25 (J6R - 706 / 707 / 762 / 763): From 01/1984 to 12/1992
  • R30 TS / TX: From 08/1976->12/1983
  • FUEGO GTX / TX: From 10/1980->10/1985
  • Alpine A310 V6

Reference: 5723
€5.00 (tax incl.)
Add to cart
In stock
Set of 12 segments Ø 76mm - 1.75Cx2x4 - 1 Set of 12 segments Ø 76mm - 1.75Cx2x4 - 1

Segment Characteristics:

  • Segment Diameter:Ø 76mm
  • Thickness of Upper Segments (Fire-resistant): 1.75mm
  • Thickness of Intermediate Segments  (Waterproof): 2mm
  • Low ring thickness (Scraper): 4mm

It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the supplied instructions.or the values ​​provided in the instruction manual.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.

Reference: 5002
€94.00 (tax incl.)
Add to cart
In stock
1

Please sign in first.

Sign in