Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Juvaquatre Ventoux 845 cm³ engine (Type 670 - Bore Ø58mm) (Page 2 sur 2)
Sheet Dimensions: Length 58cm x Width 35cm
Sheet Thickness: 1.6mm
Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all...
In stock
Sheet Dimensions: Length 50cm x Width 35cm
Sheet Thickness: 1.2mm
Ideal for making water seals, oil pumps, cylinder head cover gaskets, oil pan gaskets, and intake or exhaust manifold gaskets. Temperature limit:...
In stock
Limited special offer
In stock
This oil is best for engines equipped with cork and paper gaskets and not equipped with an oil filter.
For summer use, it is preferable to use SAE 50 oil, which will be thicker than SAE 30 oil.
In stock
This oil is best for engines equipped with cork and paper gaskets and not equipped with an oil filter.
For summer use, it is preferable to use SAE 50 oil, which is thicker than SAE 30 oil.
In stock
The HTX PRESTIGE SAE 40 engine oil formula has been specially designed for the engines of vehicles manufactured between 1900 and 1960, for models without oil filters or with cyclone separators.
This engine oil is...
In stock
In stock
In stock
x1 pot of fine grain 240 lapping paste
x1 pot of coarse grain 120 lapping paste
In stock
Piston diameter: Ø 53 mm (Minimum) to Ø 125 mm (Maximum)
Tool height: 75 mm
Supplied with a square tightening wrench
Ideal tool for installing pistons in the cylinder block
Out of stock
Bore diameter: Ø 55mm (Minimum) to Ø 170mm (Maximum)
Stone dimensions: 77mm
Interchangeable honing stone
Self-adjusting and tightening sanding arm with flexible drive for pneumatic or electric drills
For honing,...
In stock
In stock
Metric tap (ISO 6H tolerance): M6x100 (Right-hand thread)
Tap length (Overall): 66 mm
Mounting recess: 5 mm square
Pointed point tap, suitable for: Through holes
Machine tap: Only one tap is needed to create a...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 9006 Aluminum Gray
Applicable directly with a brush or spray gun by...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 9005 BLACK
Applicable directly with a brush or spray gun by diluting...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: RAL 6005 green
Applicable directly with a brush or spray gun by diluting...
In stock
Delivery in France only
Anti-corrosion paint for engine block, crankcase, brake drum, and gearbox.
Resistant to 180°C
Capacity: 500ml
Color: Reddish brown RAL 3011
Applicable directly with a brush or spray gun by...
In stock
Delivery in France only
Thinner for use with paint reference: C021 - C022 - C023 - C015 - C016
In stock