Mounting center distance: 134mm
Single-piston brake caliper: Ø 54mm
Braking system: TRW type
For brake disc thickness: 20.2mm
Suitable for:
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502)
Renault 18
Renault...
In stock
Alpine GTA braking
All our braking parts for Alpine GTA
Mounting distance: 134mm
Single-piston brake caliper: Ø 54mm
Braking system: TRW type
For brake disc thickness: 20.2mm
Suitable for:
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502)
Renault 18
Renault 25 and...
In stock
Kit Contents:
Caliper/stub mounting screws: x2
Guide stub: x2
Protective boot: x2
Assembly grease x1
For braking systems: TRW or Lucas type
This kit is suitable for mounting a right or left caliper on a caliper yoke...
In stock
Suitable for the following vehicles:
SUPER 5 / R9 / R11 / R18 / R19 / R21 / R25: Front Brakes
Clio 1.8L 16V / Clio Williams: Front Brakes
Alpine GTA V6 GT (D500) et V6 Turbo (D501 et D502) : Front Brakes
Pad...
In stock
Suitable for the following vehicles:
SUPER 5 / R9 / R11 / R18 / R19 / R21 / R25: Front Brakes
Clio 1.8L 16V / Clio Williams: Front Brakes
Alpine GTA V6 GT (D500) et V6 Turbo (D501 et D502) : Front Brakes
Brake...
In stock
Suitable for the following vehicles:
R11 / R18 / R19 / R21 / R30: Front Brakes
Super 5 GT Turbo: Front Brakes
Brake Pad Dimensions:
Width: 105mm
Height: 55mm
Thickness: 18mm
In stock
Suitable for the following vehicles:
SUPER 5 / R9 / R11 / R18 / R19 / R21: Front Brakes
Clio 1.8-16V: Front Brakes
Alpine GTA (V6 GT and V6 Turbo): Rear Brakes
Brake Pad Dimensions:
Width: 105mm
Height: 54mm...
In stock
Hose Specifications:
Overall Length: 475mm
Thread/Tap: Male M10x100 and Female M10x100
Suitable for: Front Right or Front Left
Suitable for:
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502)
In stock
Hose Specifications:
Overall Length: 410mm
Thread/Tap: Male M10x100 and Female M10x100
Suitable for: Front Right or Front Left
Suitable for:
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502)
In stock
Hose Specifications:
Overall Length: 375mm
Thread/Tap: Male M10x100 and Female M10x100
Suitable for: Rear Right or Rear Left
Suitable for:
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502)
In stock
Suitable for:
R5 Turbo 1 and 2 (8220)
A310 V6 - After 1980(From #47709 to the end of the series)
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502): Rear brake caliper
Kit contents:
Spring clips: x4
Retaining...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
UNF thread tap (2B tolerance): Ø 3/8"-24 UNF (Right-hand thread)
Tap length (Overall): 63 mm
Mounting drive: 5.5 mm square
Flat end tap, suitable for: Through and blind holes
Machine tap: Only one tap is needed to...
In stock
UNC - UNF Standard: Threads from 24 to 11 threads (3/8-24 UNF, 7/16-20 UNF, 1/2 x 20 UNF....)
Tool for restoring internal and external threads (Thread Comb)
Suitable for restoring right-hand and left-hand threads, as...
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Suitable for die outer diameter: Ø 30mm
Die height: 10mm
Two-arm die holder made of high-quality steel
In stock
UNF die, DIN223 standard: Ø 3/8"-24 UNF (Right-hand thread)
Outer diameter of the die: Ø 30 mm
Die height: 11 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel / Aluminum...
In stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
Out of stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
In stock