Suitable for the following vehicles:
R5 / SUPER 5 / R9 / R11 / R18 / R19 / R21: Front Brakes
Clio 1.8-16V: Front Brakes
Alpine GTA (V6 GT and V6 Turbo): Rear Brakes
Brake Pad Dimensions:
Width: 105mm
Height:...
In stock
R11 / R11 Turbo Braking
Our braking spare parts for the Renault R11 / R11 Turbo
Discover here a wide selection of parts to restore and ensure the proper functioning of the braking system of your Renault R11 / R11 Turbo
Whether you are looking for wheel cylinders, hoses, master cylinder, brake disc, lockheed, reservoir, fitting, stop switch, repair kit, copper braking circuit...at AVP, Arnaud Ventoux Pièces, you will find everything you need for bring your old one back to life with quality components.
Suitable for the following vehicles:
R5 / SUPER 5 / R9 / R11 / R18 / R19 / R21 / R25: Front Brakes
Clio 1.8L 16V / Clio Williams: Front Brakes
Alpine GTA (V6 GT and V6 Turbo): Front Brakes
Brake Pad Dimensions:...
In stock
Suitable for the following vehicles:
SUPER 5 / R9 / R11 / R19: Rear Brakes
Clio 1.8L 16V: Rear Brakes
Clio Williams 16V: Rear Brakes
Brake Pad Dimensions:
Width: 105.2 mm
Height: 54.8 mm
Thickness: 11 mm
For...
In stock
Suitable for the following vehicles:
R9 / R11 / R18 / R19 / R21 / R25 / R30: Front Brakes
Alpine A610: Front Brakes
Alpine GTA / V6GT: Front Brakes
Brake Pad Dimensions:
Width: 100.1 mm
Height: 64.8 mm...
In stock
Suitable for the following vehicles:
SUPER 5 / R9 / R11 / R19:Rear Brakes
Clio 1.8L 16V: Rear Brakes
Clio Williams-16V: Rear Brakes
Pad dimensions:
Width: 105mm
Height: 54.9mm
Thickness:...
In stock
Suitable for the following vehicles:
R5 / R11 / R18 / R19 / R21: Front Brakes
Super 5 GT Turbo: Front Brakes
Alpine GTA: Front Brakes
Brake Pad Dimensions:
Width: 100mm
Height: 65mm
Thickness: 18mm
In stock
Suitable for the following vehicles:
R5 / R11 / R18 / R19 / R21 / R30: Front Brakes
Super 5 GT Turbo: Front Brakes
Brake Pad Dimensions:
Width: 105mm
Height: 55mm
Thickness: 18mm
In stock
Kit Contents:
Caliper/stub mounting screws: x2
Guide stub: x2
Protective boot: x2
Assembly grease x1
For braking systems: TRW or Lucas type
This kit is suitable for mounting a right or left caliper on a caliper yoke...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
UNF thread tap (2B tolerance): Ø 3/8"-24 UNF (Right-hand thread)
Tap length (Overall): 63 mm
Mounting drive: 5.5 mm square
Flat end tap, suitable for: Through and blind holes
Machine tap: Only one tap is needed to...
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Suitable for die outer diameter: Ø 30mm
Die height: 10mm
Two-arm die holder made of high-quality steel
In stock
UNF die, DIN223 standard: Ø 3/8"-24 UNF (Right-hand thread)
Outer diameter of the die: Ø 30 mm
Die height: 11 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel / Aluminum...
In stock
ELF HTX 320 is a brake fluid for racing vehicles, based on glycol ether technology and designed to not retain atmospheric moisture.
Highly stable brake fluid at high temperatures (>320°C), with anti-corrosion...
In stock