Curve provided for SP95 / SP98 octane unleaded fuel
In stock
Ignition A110 -1600 (SC /SI / SX)
This lighter is suitable for:
R12.G / A310.4 (Engin 1605cm³)
Igniter to be used with a primary resistance coil between 2.5 and 3.5 ohms,
Compatible with AVP4708 and AVP4715 coils,
In stock
Ignition curve designed for unleaded fuel SP95 / SP98
Platinum-plated screw with externally adjustable contact points
Replaces DUCELLIER distributors: 525055 / 525056 / 4215 / 4217 / 4235 / 4236 / 4434
Suitable for...
Out of stock
In stock
In stock
Original Ducellier ref: 16903 - 661004 - 661154
Out of stock
Points set with internal adjusting screw, suitable for distributors with and without vacuum advance
Brand: Ducellier
Renault OE Ref: 0854137800 / 608012 / 618701 / 71133 (Ducellier)
In stock
In stock
Capsule diameter Ø 55mm
The old-generation 65mm diameter capsules have been replaced by 55mm diameter models. The curve and mounting remain unchanged.
The operation of the vacuum advance is very important on certain...
In stock
In stock
In stock
Compatible with Ducellier igniters with an inner body diameter of Ø 58.8mm
WARNING: Not suitable for igniters with externally adjustable contact breakers (different plate attachment points)
Supplied with 3 screws for...
In stock
Compatible with Ducellier igniters with an inner body diameter of Ø 58.8 mm
CAUTION : Not suitable for igniters with externally adjustable contact breakers (different plate attachment points)
Supplied with 3 screws...
In stock
Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Compatible for Ducellier igniter with an internal body diameter of Ø 58.8mm
Not suitable for an...
In stock
Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Compatible for Ducellier igniter with an inner body diameter of Ø 58.8mm
Not suitable for an igniter...
In stock
In stock
Compatible for any Ducellier igniter with an inside diameter of the body of 58.8mm
In stock
In stock
Primary winding resistance: 2.8 ohms
Secondary winding resistance: 7900 ohms
Coil compatible with electronic ignition kits Ref AVP4798 and Ref AVP4799
Out of stock
Primary winding resistance: 3.1 ohms
Secondary winding resistance: 9200 ohms
Coil compatible with electronic ignition kits ref. AVP4798 and AVP4799
In stock
Specially designed for "123 Ignition" brand distributors
Coil:1 input / 2 poles
Primary winding resistance: 1.6 ohms
Secondary winding resistance: 9270 ohms
Sold with its bracket
In stock
Ignition coil without control: 1 input / 5 poles
Primary winding resistance: 0.7 ohms
Secondary winding resistance: 5600 ohms
ADVANTAGES:
Oil-free coil, no overheating
Increased ignition performance
Improved...
In stock
We would like to point out that our spark plug wires are made with 7 mm diameter silicone wires, with a standard copper core (wire material), which means they do not have interference protection.
If the vehicle is...
In stock
Suitable for:
R8.G (1255cc and 1296cc Engine)
GT4 / Matradjet (1255cc Engine)
A110 1100G and 1300G
A110.1600 (S / SC / SI)
A310.4 1600VF (Injection)
R12G / R17G
Super 5GT Turbo
In stock
Suitable for:
A110.1600 (S / SC / SI)
R12G / R17G
A310.4 (VE et VF)
Simca Rallye 2 et Rallye 3 (Prepared engine)
In stock
In stock