- Thick Washer M12
- Washer Outer Diameter: Ø 35mm
- Washer Thickness: 4.5mm
- Sold individually
- Original Renault / Alpine OE Ref (Tie) : 6075910 / 0607591000
- Renault OE Ref (Screw) : 7703053072
In stock
M12 screw for crankshaft pulley fixing - 1289cc engine (Type 810-..)
Reference:
8022
- Screw length under head: 35mm
- Screw pitch: 175
- Sold individually
- Renault OE part number: 7703001203
€2.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
You may also like
Pulley specifications:
- Suitable for a 10mm wide belt
- Pulley outer diameter: Ø 140mm
- Crankshaft bore diameter: Ø 24mm
- Keyway dimensions: Width 5mm / Length 34mm
- Oil seal contact surface diameter: Ø 35mm
- Oil seal contact surface length: 20mm
- Central hub offset: 34.2mm
- Belt offset: from the center of the belt to the end of the pulley facing the timing cover: 31mm
A steel sleeve is fitted to the oil seal contact surface to improve sealing and reduce pulley wear.
- Renault OE Ref.: 7700507524 / 7700650823
In stock
Pulley specifications:
- Suitable for a 10mm wide belt
- Pulley outer diameter: Ø 140mm
- Crankshaft bore diameter: Ø 24mm
- Keyway width and length: Width 5mm / Length: 34mm
- Oil seal contact surface diameter: Ø 35mm
- Oil seal contact surface length: 20mm
- Central hub offset: 36mm
- Belt offset: from the center of the belt to the end of the pulley inside the timing cover: 32mm
- Renault OE Ref.: 7700507524 / 7700650823
Out of stock
In stock
Customers who bought this product also bought:
In stock
- Thread: M10x150
- Length under head: 100mm
- Need 10 screws per motor
In stock
&media=https://www.arnaudventouxpieces.com/11772-large_default/vis-m12-pour-fixation-de-poulie-de-vilebrequin-moteur-1289cm-type-810-.jpg){kind=link}
In stock
- Primary winding resistance: 3.1 ohms
- Secondary winding resistance: 9200 ohms
- Coil compatible with electronic ignition kits ref. AVP4798 and AVP4799
In stock
Dowel Dimensions:
- Dowel Thread: M12 ((125 Pitch / Class 10.9)
- Dowel Head Diameter: Ø 19.50mm
- Dowel Recess Diameter: Ø 14.30mm
- Dowel Length Under Head: 33mm
- Dowel Overall Length: 38mm
Suitable for:
- Alpine A110 1300 / 1600: (Front and rear hubs with disc brakes)
- Alpine GT4:(Front and rear hubs with disc brakes)
- Caravelle: (R1133) / Floride (R1131):(Front and rear hubs with disc brakes)
- Dauphine: R1094 and R1095(Front and rear hubs with disc brakes)
- Matradjet:(Front and rear hubs with disc brakes)
- R8 / R10: (Front hubs with disc brakes)
- R8 G: R1135 (Front and rear hubs with disc brake)
- R12: All models (Rear hub with drum brake)
- R12 G: R1173 (Front and rear hubs with disc brake)
- R16 TS: R1151 (Rear hub with drum brake)
- R16 L/TL: R1153 (Front hub with disc brake and rear hub with drum brake)
- R17 TL: R1312 From serial number 30471 to the end of series 30470 (Front hub with disc brake and rear hub with drum brake)
- R17 TL: R1322 From serial number 2451 to the end of series 30470 Series (Front hubs with disc brake and rear hubs with drum brake)
- R17 G:(Front and rear hubs with disc brake)
In stock