Mounting center distance: 134mm
Single-piston brake caliper: Ø 54mm
Braking system: TRW type
For brake disc thickness: 20.2mm
Suitable for:
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502)
Renault 18
Renault...
In stock
R25 braking
Our braking parts for the Renault 25
Access now a wide selection of parts to maintain and ensure the performance of your Renault 25's braking system.
Whether you're looking for wheel cylinders, hoses, master cylinders, brake discs, original calipers or big brakes, brake reservoirs, fittings, stop switches, repair kits, or even a copper braking system... At AVP – Arnaud Ventoux Parts, you will find everything you need to bring your Renault 25 classic car back to life with reliable, quality parts.
Mounting distance: 134mm
Single-piston brake caliper: Ø 54mm
Braking system: TRW type
For brake disc thickness: 20.2mm
Suitable for:
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502)
Renault 18
Renault 25 and...
In stock
Kit Contents:
Caliper/stub mounting screws: x2
Guide stub: x2
Protective boot: x2
Assembly grease x1
For braking systems: TRW or Lucas type
This kit is suitable for mounting a right or left caliper on a caliper yoke...
In stock
Suitable for the following vehicles:
R5 / SUPER 5 / R9 / R11 / R18 / R19 / R21 / R25: Front Brakes
Clio 1.8L 16V / Clio Williams: Front Brakes
Alpine GTA (V6 GT and V6 Turbo): Front Brakes
Brake Pad Dimensions:...
In stock
Suitable for the following vehicles:
R9 / R11 / R18 / R19 / R21 / R25 / R30: Front Brakes
Alpine A610: Front Brakes
Alpine GTA / V6GT: Front Brakes
Brake Pad Dimensions:
Width: 100.1 mm
Height: 64.8 mm...
In stock
Suitable for:
R5 / R18 / R21 / R25 / R30 / : Rear Brake
R8: Rear Big Brake Installation
R5 Alpine Turbo (122B): Rear Brake
R12G / R17G: Rear Brake
A110: Rear Big Brake Installation
A310.4: Rear Brake
A310 V6...
In stock
Suitable for the following vehicles:
R5 / R18 / R21 / R25 / R30 / : Rear Brakes
R8: Big Rear Brakes
R5 Alpine Turbo (122B): Rear Brakes
R12G / R17G: Rear Brakes
A110: Big Rear Brakes
A310.4: Rear Brakes
Alpine A310...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
UNF thread tap (2B tolerance): Ø 3/8"-24 UNF (Right-hand thread)
Tap length (Overall): 63 mm
Mounting drive: 5.5 mm square
Flat end tap, suitable for: Through and blind holes
Machine tap: Only one tap is needed to...
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Suitable for die outer diameter: Ø 30mm
Die height: 10mm
Two-arm die holder made of high-quality steel
In stock
UNF die, DIN223 standard: Ø 3/8"-24 UNF (Right-hand thread)
Outer diameter of the die: Ø 30 mm
Die height: 11 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel / Aluminum...
In stock