Suitable for WEBER 40DCOE, 45DCOE and IDF carburetors
Sold individually, requires 2 pieces per carburetor
Number 31 on the exploded view
Compatible with other WEBER carburetors, see below
In stock
New products
Suitable for WEBER 40DCOE AND 45DCOE carburetors
This fits on the side opposite the throttle control
Part number 86 on exploded view
Also suitable for: 30 IBA, 32 IBA, 36 DCNF, 36 DCNFA, 36 DCNV, 36 DCNVA, 38 DCOE,...
In stock
Shifting washer against throttle shaft bearing for carburettor WEBER 40DCOE AND WEBER 45DCOE
Thickness: 0.5mm
Inner Ø: 7mm
Outer Ø: 14mm
Number 77 on exploded view
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 78 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Throttle valve for carburettor WEBER 45DCOE
Angle of 78°
16mm between fixing holes
Number 33 on exploded view
In stock
Throttle valve for WEBER 40DCOE carburettor
Angle of 78°
16mm between fixing holes
Number 33 on exploded view
In stock
Axle for carburetor WEBER 40DCOE old generation
ATTENTION mounts with flat screw REF 48052
Drilling for recovery pump control to be done
Length 180mm overall
Number 85 on exploded view
In stock
Suitable for old generation WEBER 45DCOE carburettor
WARNING: must be mounted with flat screw REF 48052. Drilling for accelerator pump control to be done.
Overall length: 180mm
Number 85 on exploded view
Also...
In stock
Suitable for new generation WEBER carburetors
Flat type screw (not tapered)
Sold infividually, requires 4 pieces for 1 carburetor
Number 35 on exploded view
Compatible with other WEBER carburetors, see below.
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors old generation for the throttle screw,
Suitable for all types of WEBER 40 and 45 DCOE carburetors for the inspection hatch,
Sold individually,
Countersunk head and...
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors,
For 23g or 26g brass or plastic float,
Requires 1 piece per carburetor,
Number 72 on the exploded view,
Also suitable for the following carburetors: DCOE, DCO/SP,...
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 74 in exploded view
Also suitable for carburetors: 34 DCHE, 36 DCS, 40 DCOM, 45 MCHH22.
In stock
Allows you to replace the choke cover with a simple WEBER choke cover for a 40DCOE or 45DCOE carburetor.
Suitable for carburetors: 40 DCOE, 45 DCOE, 40 IDF, 44 IDF, 48 IDF.
In stock
Complete cover with lever for WEBER 40DCOE and 45DCOE carburettor
RIGHT-HAND COVER STOP
Number 42 on exploded view
In stock
Complete cover with lever for WEBER 40DCOE and 45DCOE carburettor
LEFT Cable Stop
Number 42 on exploded view
In stock
Suitable for WEBER 40DCOE and 45DCOE carburettor
Number 54 on exploded view
Also suitable for: 35 DCNL, 38 DCNL, 38 DCOE, 40 DCOE, 40 DCNL, 42 DCOE, 45 DCOE.
In stock
Starter piston spring for WEBER 40DCOE and 45DCOE carburettor
Number 55 on exploded view
In stock
Idle speed adjustment screw spring for WEBER 40DCOE and 45DCOE
sold individually, ,eed 2 pieces for one carburettor
Part number 47 on the exploded view
Fits other WEBER carburettors, see below
In stock
Suitable for WEBER 40DCOE and 45DCOE
sold individually, need 2 pieces for one carburettor
Part number 46 on exploded view
Compatible with other WEBER carburettors, see below
In stock
Suitable for carburettor WEBER 40DCOE / 45DCOE
To ensure a perfect seal between the mixture screw and the carburettor body (do not forget the support cup)
sold individually, need 2 pieces for a carburettor
Number...
In stock
Suitable for WEBER 40DCOE 151 and 45DCOE 152 (latest generation)
Sold individually, need 2 pieces for one carburettor
Number 56 on exploded view
Compatible with other WEBER carburettors, see below
In stock
Suitable for first generation WEBER 40DCOE and 45DCOE carburetors
Sold individually, requires 2 pieces for one carburetor
Number 56 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Accelerator pump cap for WEBER 40DCOE and 45DCOE carburettor
Sold individually, need 2 pieces for one carburettor
Number 59 on exploded view
Compatible with other WEBER carburettors, see below
In stock
Suitable for WEBER 40DCOE and 45DCOE carburettors
Sold individually, need 2 pieces for one carburettor
Number 58 on exploded view
Compatible with other WEBER carburettors, see below
In stock
Fit for WEBER 40DCOE and 45DCOE Carburetor
Sold individually, need 2 pieces for one carburetor
Part number 58 on exploded view
Compatible with other carburetors WEBER, see below
In stock
Suitable for WEBER 40DCOE and 45DCOE carburettor
Sold individually, need 2 pieces for one carburettor
Part number 65 on exploded view
In stock
Suitable for WEBER 40DCOE and WEBER 45DCOE
Sold individually, need 2 pieces for one carburetor
Number 64 on exploded view
Also suitable for the following carburetors: 32 DCOF, 38 DCOE, 40 DCO3, 40 DCOE, 42 DCOE, 45...
In stock
Suitable for WEBER 40DCOE and 45DCOE carburettor
Sold individually, need 2 pieces for one carburettor
Number 63 on exploded view
Also suitable for the following carburettors: 38/40/42/45/48 DCOE, 48/50/55 DCO/SP, 45...
In stock
Suitable for WEBER 40DCOE and WEBER 45DCOE carburettor
Thread16x1.5
Need 1 piece for a carburetor
Number 1 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Gasket dimensions: Ø 20x12x1mm
Suitable for WEBER 40DCOE and 45DCOE carburetors
Number 2 and number 69 on exploded view
Sold individually, 1 piece required for one carburetor
Compatible with other WEBER carburetors,...
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
Requires 1 part per carburetor
Number 3 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
M5X22 screws
Sold individually, requires 9 pieces for one carburetor
Number 5 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Suitable for WEBER 40DCOE and 45DCOE carburetors
M4X16 screw
Sold individually, requires 2 pieces for one carburetor
Number 40 on exploded view
Compatible with other WEBER carburetors, see below
In stock
Choke filter for WEBER 40DCOE and 45DCOE carburetors
Requires 1 piece per carburetor
Part number 87 on exploded view
Also suitable for: 35 DCNL, 36 DCNF, 36 DCNFA, 38 DCNL, 40 DCNF, 40 DCNL, 38 DCOE, 40 DCOE, 42...
In stock
In stock
In stock
WARNING: This fits with spring guide REF 48040
Suitable for WEBER 40DCOE and 45DCOE carburetors
Also suitable for: 22 IM, 26 IM, 26 IMB, 28/36 DCB, 28/36 DCD, 32 IMPE, 34 DCHD, 34 DCHE, 34 DCS, 35 DCNL, 36 DCD, 38...
In stock
Allows the guiding of the choke piston spring for WEBER 40DCOE and WEBER45DCOE carburettors
ATTENTION: Must be fitted with retaining ring REF 48039
Also suitable for the following carburettors: 38 DCOE, 40 DCOE, 42...
In stock
WARNING: Suitable for Venturi ref 48085 and ref 48086 for WEBER 40DCOE and 45DCOE carburetors.
Allows you to stop the movement of the venturi for older generation DCOEs, and stop the movement of the nozzle and...
In stock
Kit includes: 4 screws, 8 washers, and 4 nuts
This kit allows you to install an aluminum shim on the pivot (right or left),
2 kits required per vehicle.
In stock
Washer sold individually
One washer allows the centering of a brake disc on the pivot
2 washers are required to equip a front or rear axle.
In stock
Shim sold individually, 2 shims required to equip a front axle.
In addition to the aluminum shim for attaching the front caliper, a caliper yoke is required (not available in the AVP catalog)
WARNING: This assembly...
In stock
In stock
In stock
In stock
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
Sold individually
Shim height indicated in the photo
The shims allow you to adjust the rack height, which helps limit variations in alignment during suspension movements.
AVP Accuracy: The two shims can be different...
In stock
Sold with screws, washers, and nuts.
In stock
In stock
Diameter of the 3 holes for the strike plate mounting screws: M8x100
In stock
In stock
In stock
Length under head: 21mm
Suitable for certain Type 810 (1289cc) engines:
R10 / R12 / R15 / Estafette
Alpine V85
OE Renault Ref: 0706292700 / 7700709182
In stock
In stock
In stock
Installation into the R18 Turbo engine block requires no modifications or machining
The use of GS 700 cast iron liners is not necessary; these liners are thicker.
In stock
Fits:
Florida S (From 1962 to 1967): Engine 689-01 and 689-02 (From 1962 to 1967)
Caravelle (From 1962 to 1967): Engine 689-01 and 689-02 (From 1962 to 1967)
R8 (From 1962 to 1967): Engine 689-01 and 689-02
In stock
Suitable for vehicles with 1397cc engines (Type 847.20, C1J, C2J, C3J):
R5 TS / TX / GTL / Automatic / USA
R11 L / TL / TLE
R18 TL / GTL
Fuego / Express
In stock
Suitable for 1565cc engines Type 807-01 / 807-02 / 807-03 / 807-04 / 807-05 / 807-06
In stock
Suitable for 1565cc engines (Type 821-01 / 821-02 / 821-03 / 821-04 / 821-10 / 821-11 / 821-15):
R12 TL / Export
R15 TL / TS / Export
R16 L / TL / TA / TL Automatic: 1565cc engine (Type 821-01 / 821-02 / 821-03 /...
In stock
Suitable for:
Floride S and Caravelle (R1131 / R1133): 1108 cc engine (Type 688-01 / 688-02 / 688-03) and 956 cc engine (Type 689-01 / 689-02 / 698-03)
R8 / R8 Majeure (R1130 / R1132): 1108 cc engine (Type 688-01 /...
In stock
Suitable for:
Floride S and Caravelle (R1131 / R1133): 1108 cc engine (Type 688-01 / 688-02 / 688-03) and 956 cc engine (Type 689-01 / 689-02 / 698-03)
R8 / R8 Majeure (R1130 / R1132): 1108 cc engine (Type 688-01 /...
In stock
Length under head: 40.5mm
Significantly greater strength than the original, ideal for tuned engines.
Suitable for:
- Renault Clio 1.8 L 16S (F7P Engine) - Clio Williams 2.0L 16S (F7R Engine) - Clio RS 2.0L 16S (F4R...
In stock