- Identical to the YORKA and SEIMA branded keycaps
Out of stock
NEW
White and red wing light (lens and bulb holder)
Reference:
4786
- Supplied with lens, bulb holder, and bulb (BA9s 12V / 4W)
- Supplied without the gasket between the body and the bulb holder
- Fixing hole spacing: 66mm
- Color: Red and White
- Sold individually
€28.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
You may also like
- Identical to the YORKA and SEIMA branded caps
Out of stock
- Inner diameter: 145mm
- Outer diameter: 180mm
- Height: 27mm
- With top mounting clips
- Sold individually
In stock
Customers who bought this product also bought:
These twin-tube hydraulic adjustable shock absorbers are designed for versatile use, such as sporty driving.
With an adjustable damping range from softest to firmest,they are perfect for performance driving, sporty riding, or competition, while also offering the comfort and safety needed for everyday use.
Features:
- Mounting eye width: 21mm
- Lower mounting eye inner diameter: Ø 9mm
- The internal adjustment allows you to modify the rebound damping of the shock absorber.
- Shock absorbers delivered at minimum setting (fully open, i.e., softest)
- Shock absorbers sold in pairs
Suitable for:
- R8.G (R1134 / R1135) from 10/1964 to 1974
- Alpine A110 (All models): 1100cc / 1300cc / 1600cc / SX (With Alpine A310 rear axle)
- Alpine GT4 / Matradjet
Detailed description of Koni shock absorbers, see below
In stock
Bearing Dimensions:
- Dimension: Stock dimension (Standard)
- Journal Diameter (A): Ø 46.00mm
- Housing Diameter (B): Ø 49.89mm
- Bearing Width (C): 24.50mm (x4)
- Bearing Width (C): 19.50mm (x6)
- Bearing Thickness (D): 1.92mm
- Smooth, lug-type bearings with grease holes (x5) and grooves (x5)
- Bearing material: Bi-metal
In stock
&media=https://www.arnaudventouxpieces.com/12263-large_default/feu-d-aile-blanc-et-rouge-cabochon-et-support-d-ampoule.jpg){kind=link}
- Bulb of yellow headlight
- Culot 3 flat files/ European code
- Dimensions: 45x80mm
- Reference: 7701348007
- Due to the multitude of types of bulbs used, please check compatibility with your vehicle
In stock
-
- Grid mesh identical to the original
Grid dimensions :
-
- Length : 57cm
- Height : 20cm
- Curve : 7cm
In stock
- This kit contains an M9 adjustment screw nut and an M8 nut.
- Kit sold with a strong Ø 38mm square gasket and a weak Ø 38mm gasket.
- The supply of these two seals allows you to install the most suitable seal depending on the wear of the caliper grooves.
- To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
- A square symbol indicates a square seal, while a circle symbol indicates a round seal.
- It is essential to replace the same type of seal (round or square) according to the symbol on the caliper.
- We recommend checking the symbol displayed on each caliper, as a vehicle may have Calipers of different origins, some of which may have square joints and others round joints.
- It is not recommended to mix calipers on the same set, as this can lead to the risk of skewing during braking.
In stock
These twin-tube hydraulic adjustable shock absorbers are designed for versatile use, such as sporty driving.
With an adjustable damping range from softest to firmest,they are perfect for performance driving, sporty riding, or competition, while also offering the comfort and safety needed for everyday use.
Features:
- Mounting eye width: 21mm
- Lower mounting eye inner diameter: Ø 9mm
- The internal adjustment allows you to modify the rebound damping of the shock absorber.
- Shock absorbers delivered at minimum spring rate (fully open, i.e., softest setting)
- Shock absorbers sold in pairs
Suitable for:
- R8G (R1134 / R1135): From 10/1964 to 1974
- Alpine A110: 1100cc / 1300cc / 1600cc (All models except A110 SC / SX and SI)
- Alpine GT4 (For rear crossmember with 4 shock absorbers)
- Florida S and Caravelle:From 06/1964 onwards... (For rear crossmember with 4 shock absorbers)
Detailed description of Koni shock absorbers,see below
In stock