Suitable for (Engine type 662 / 668 / 670 / 670-3):
4CV / Dauphine
Estafette / Juvaquatre
Identical to Ducellier: 566 / 4054 / 4037
Replaces SEV Marchal distributor K4 A46, RB U4VA (SEV Junior)
Curve designed for...
In stock
Ignition Estafette
Our spare parts for the ignition of your Renault Estafette
Discover here a wide choice of parts to repair or maintain the ignition system of your Renault Estafette
Whether you are looking for, Ducellier distributor, rotor, platinum screws, electronic ignition kit, depression capsule, spark plug wire, ignition harness, spark plugs, ignition coil...at AVP, Arnaud Ventoux Pièces, you will find everything you need for bring your old one back to life with quality components.
This lighter is suitable for:
- 4CV / Dauphine / Estafette / Juva 4 / R4 (1st model)
- Engine 622 / 668 / 670 / 670-3
Same as Ducellier: 566 / 3910 / 2175 / 4037 / 4065 / 4076 / 4094
Kit to be used with a primary...
In stock
Suitable for (Engine Type: 688 / 689 / 810):
R4 / R6 / R8
Caravelle - Matra Jet
R12 TL - R12 TS - R15 TL
A110 V85 (810) - A110 GT4
For Ducellier reference: 4045 - 4069 - 4074 - 4075 - 4077 - 4118 - 4119 - 4125 -...
In stock
Suitable for (Engine Type 688 / 689 / 810):
R4 / R6 / R8
Caravelle - Matra Jet
R12.TL - R12.TS - R15.TL
A110.V85 (810) - A110.GT4
This distributor must be used with a coil with a primary resistance between 2.5 and...
Out of stock
Mounting diameter of the head on the igniter: Ø 64.5mm
Out of stock
In stock
Original Ducellier ref: 16903 - 661004 - 661154
In stock
Out of stock
Capsule diameter Ø 55mm
The old-generation 65mm diameter capsules have been replaced by 55mm diameter models. The curve and mounting remain unchanged.
The operation of the vacuum advance is very important on certain...
In stock
In stock
Compatible with Ducellier igniters with an inner body diameter of Ø 58.8 mm
CAUTION : Not suitable for igniters with externally adjustable contact breakers (different plate attachment points)
Supplied with 3 screws...
In stock
Compatible with Ducellier igniters with an inner body diameter of Ø 58.8mm
WARNING: Not suitable for igniters with externally adjustable contact breakers (different plate attachment points)
Supplied with 3 screws for...
In stock
Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Compatible for Ducellier igniter with an internal body diameter of Ø 58.8mm
Not suitable for an...
In stock
Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
Compatible with coils AVP4708 and AVP4715
Compatible for Ducellier igniter with an inner body diameter of Ø 58.8mm
Not suitable for an igniter...
In stock
Out of stock
Compatible for any Ducellier igniter with an inside diameter of the body of 58.8mm
In stock
In stock
In stock
In stock
Primary winding resistance: 2.8 ohms
Secondary winding resistance: 7900 ohms
Coil compatible with electronic ignition kits Ref AVP4798 and Ref AVP4799
Out of stock
Primary winding resistance: 3.1 ohms
Secondary winding resistance: 9200 ohms
Coil compatible with electronic ignition kits ref. AVP4798 and AVP4799
In stock
This ignition harness consists of4 spark plug wires and 1 coil wire.
We would like to point out that our spark plug wires are made with Ø 7 mm silicone wires, black in color, with a standard copper core (wire...
Out of stock
Suitable for:
R8 (688 and 689 Engine) / Caravelle / Floride S
R4 / R5 / Estafette (Cleon Engine and Billancourt Engine)
R12 / Estafette (1289cc Engine) / Matradjet
A110.V85 / GT4
In stock