- Sold with drill bit holder
- Includes 5 drill bits in each of the following sizes:
- 0.6mm
- 0.7mm
- 0.8mm
- 0.9mm
- 1.0mm
- 1.1mm
- 1.2mm
- 1.3mm
- 1.4mm
- 1.5mm
- 1.6mm
- 1.8mm
- 2.0mm
- 2.1mm
- 2.2mm
- 2.3mm
- 2.4mm
- 2.5 mm
- 2.6mm
- 2.8mm
- 3.0mm
- 3.2mm
In stock
Gauge for calibrating nozzles from 0.45 to 1.5mm
Reference:
48108
- Allows control of nozzle calibration
- Graduation is 0.05 mm in 0.05 mm increments, with a minimum of 0.45 mm and a maximum of 1.5 mm.
€35.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
- Here is the list of gauge graduations: 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 1.00, 1.05, 1.10, 1.15, 1.20, 1.25, 1.30, 1.40, 1.50.
You may also like
- Allows control of nozzle calibration
- Graduation is 0.10 mm in 0.10 mm increments, with a minimum of 1.5 mm to 3.00 mm and a maximum of 1.5 mm.
In stock
Customers who bought this product also bought:
Bearing Dimensions:
- Dimension: Original (Standard) Dimension
- Crankpin Diameter (A): Ø 43.98mm
- Housing Diameter (B): Ø 47.62mm
- Bearing Width (C): 20.75mm
- Bearing Thickness (D): 1.81mm
- Smooth, lug-type bearings with no grease holes or grooves
- Bearing Material: Bimetal
In stock
In stock
Spacer dimensions:
- Inner diameter: Ø 72mm
- Recess diameter: Ø 88mm
- Outer diameter: Ø 108mm
- Spacer thickness: 16mm
- Sold individually
Designed for installation only with original springs featuring a wire diameter of 12.5mm
In stock
In stock
Convient pour:
- R8 / A110: Frein Arrière (Montage Type gros frein)
- A310.4 (Tous modèles) : Frein Arrière
- A310.6 (Avant 1980) : Frein Arrière
In stock
A steel fret is fitted on the surface of the oil seal for better sealing and reduced wear on the pulley.
- For fitting a belt width: 13mm
In stock
Out of stock