Front stabilizer bar hook - A310 V6 (From n°47709 to end of series) / Alpine GTA / A610 - Ref 7700630426 / 7700630425

• Gaitor to be mounted on the steering rack equipped with original steering rods ("fork" rod)

Ø bowl side gearbox 81mm / Ø shaft 25mm

• Usable length (L on diagram photo number 3): 14mm

Neoprene-type contact adhesive in spray form, extra-strong. It adheres to many materials such as leather, fabrics, plastic, woodwork, etc. Allows simple, rapid, precise, and durable bonding of materials. Applies as a transparent film.

Packaged in an aerosol can with a multidirectional nozzle, it allows for fine, medium, and wide sprays, making it possible to spray all surfaces.

Application:

• Glue from a distance of 20-25 cm on previously degreased surfaces.
• Wait approximately 2 minutes before bringing the two surfaces into contact.
• Press the parts briefly and firmly after joining.

Technical specifications:

• Brand: Restom
• Model: NéoSpray Glue 
• Capacity: 400ml
• Coverage: approximately 5 m²
• Resists up to 80°C continuously and 100°C peaks

Shipping possible only in mainland France

This kit consists of the following copper pipes:

• From the brake master cylinder to the front right wheel
• From the brake master cylinder to the front brake proportioning valve (3/8"-24UNF fitting)
• From the brake master cylinder to the front brake proportioning valve (M10x100 fitting)
• From the front proportioning valve to the rear three-way fitting
• From the rear three-way fitting to the rear right wheel
• From the rear three-way fitting to the rear left wheel

Suitable for vehicles:

• R12
• R15 / R17
• A310.4: VF and VE (From chassis no. 910 to the end)
• A310 V6

Suitable for:

A310.6: Front and rear disc - After 1980 (n°47709 at the end of the series)

R5 Turbo: Front and rear disc