Set of connecting rod bearings Ø 37.50mm - Repair dimension (+0.50)
Reference:
1021
Suitable for vehicles:
- 4CV / Juvaquatre: Type 662 Engine (From June 1956)
- Dauphine / Dauphinoise / Estafette / Floride A106 / A108: Type 670 Engine
- R4: Billancourt Type 800-02/05 Engine (From 1962)
Bearing Dimensions:
- Dimension: Repair Dimension (+0.50)
- Crankpin Diameter (A): Ø 37.50mm
- Housing Diameter (B): Ø 41.14mm
- Bearing Width (C): 21.18mm
- Bearing Thickness (D): 1.82mm
- Smooth, lug-type bearings with no grease holes or grooves
- Bearing Material: Bimetal
€29.17
Order before 1pm and enjoy same day shipping !
Also suitable for 4L: Engine 800-02/05 (from 1962)
Customers who bought this product also bought:
For engine with water pump, x4 outlets.
Kit sold without valve stem seals (AVP1012), without copper base seals and without the timing case oil seal (AVP1029).
In stock
Segment Characteristics:
- Segment Diameter:Ø 60mm
- Thickness of Upper Segments (Fire-resistant):1.5mm
- Thickness of Intermediate Segments (Waterproof):1.5mm
- Thickness of the lower segments (scraper): 3mm
It is essential to check the ring end gap of each piston ring before installing them on the pistons, according to the values given by the manufacturer or in the supplied instructions.
During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.
In stock
Suitable for:
- 4CV (R1063) / Alpine A108
- Dauphine / Dauphine Gordini
- Floride
In stock
In stock
&media=https://www.arnaudventouxpieces.com/6623-large_default/set-of-connecting-rod-bearings-o3750mm-repair-dimension-050.jpg){kind=link}