Mounting center distance: 134mm
Single-piston brake caliper: Ø 54mm
Braking system: TRW type
For brake disc thickness: 20.2mm
Suitable for:
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502)
Renault 18
Renault...
In stock
R30 braking
Our brake parts for your Renault R30
Find here a complete selection of spare parts to maintain, restore, and ensure the proper functioning of the brake system of your Renault R30.
Whether you're looking for: wheel cylinders, brake hoses, master cylinders, brake discs, original or big brake calipers, Lockheed brake reservoirs, fittings, stop switches, repair kits, or even copper brake circuits... At AVP – Arnaud Ventoux Parts, we offer everything you need to bring your classic Renault R30 back to life with reliable, quality components.
Mounting distance: 134mm
Single-piston brake caliper: Ø 54mm
Braking system: TRW type
For brake disc thickness: 20.2mm
Suitable for:
Alpine GTA: V6 GT (D500) and V6 Turbo (D501 and D502)
Renault 18
Renault 25 and...
In stock
Kit Contents:
Caliper/stub mounting screws: x2
Guide stub: x2
Protective boot: x2
Assembly grease x1
For braking systems: TRW or Lucas type
This kit is suitable for mounting a right or left caliper on a caliper yoke...
In stock
Suitable for the following vehicles:
R11 / R18 / R19 / R21 / R25 / R30: Front Brakes
Alpine A610: Front Brakes
Alpine GTA / V6GT: Front Brakes
Brake Pad Dimensions:
Width: 100.1 mm
Height: 64.8 mm
Thickness:...
In stock
Suitable for the following vehicles:
R11 / R18 / R19 / R21 / R30: Front Brakes
Super 5 GT Turbo: Front Brakes
Brake Pad Dimensions:
Width: 105mm
Height: 55mm
Thickness: 18mm
In stock
Suitable for:
R8 : Rear Big Brake Installation
R5 Alpine Turbo (122B) : Rear Brake
R12G / R17G : Rear Brake
R18 / R21 / R25 / R30 : Rear Brake
A110 : Rear Big Brake Installation
A310.4 : Rear Brake
A310 V6 (Pre-1980)...
In stock
Suitable for the following vehicles:
R5 / R18 / R21 / R25 / R30 / : Rear Brakes
R8: Big Rear Brakes
R5 Alpine Turbo (122B): Rear Brakes
R12G / R17G: Rear Brakes
A110: Big Rear Brakes
A310.4: Rear Brakes
Alpine A310...
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
UNF thread tap (2B tolerance): Ø 3/8"-24 UNF (Right-hand thread)
Tap length (Overall): 63 mm
Mounting drive: 5.5 mm square
Flat end tap, suitable for: Through and blind holes
Machine tap: Only one tap is needed to...
In stock
UNC - UNF Standard: Threads from 24 to 11 threads (3/8-24 UNF, 7/16-20 UNF, 1/2 x 20 UNF....)
Tool for restoring internal and external threads (Thread Comb)
Suitable for restoring right-hand and left-hand threads, as...
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Suitable for die outer diameter: Ø 30mm
Die height: 10mm
Two-arm die holder made of high-quality steel
In stock
UNF die, DIN223 standard: Ø 3/8"-24 UNF (Right-hand thread)
Outer diameter of the die: Ø 30 mm
Die height: 11 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel / Aluminum...
In stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
Out of stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
In stock