Flexible clutch cable - A110.1600S (1600.VB and VC) - Ref 6000001277

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same seal type (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different manufacturers, some with square seals and others with round seals. round.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of calipers slipping when braking.

Inlet and outlet Ø 6-8mm

The entire kit is made up of 3/8" -24UNF fittings

This kit is made up of the following copper pipes:

- from the brake master cylinder to the Front Right wheel

- from the brake master cylinder to the Front Left wheel

- from the brake master cylinder to the distributor or rear three-way connection

- from the three-way connection or rear distributor to the right rear wheel

- from the three-way connection or rear distributor to the left rear wheel

- Primary winding resistance: 3.1 ohms

- Coil compatible with electronic ignition kits ref 4798 and ref 4799

• Need 3 AVP6815 gaskets and 1 AVP6816 gasket to equip one engine