Exhaust valve - Ø 25x6x74.1mm

To turn on a temperature warning light

Trigger temperature 105°C

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same seal type (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different manufacturers, some with square seals and others with round seals. round.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of calipers slipping when braking.

Filter Dimensions:

• Inner Diameter (D2): Ø 95mm
• Outer Diameter (D1): Ø 130mm
• Height (H1): 142mm

The dimensions given are for guidance only; slight variations of a few millimeters are possible depending on availability.

Please note, several versions have been put on sale, it is important to check compatibility with your vehicle.

Need 2 pieces per pebble

Cylinder head gasket specifications:

• • Crimping diameter: Ø 59.7mm
  • Cylinder head gasket thickness:1.40mm

Installation direction: 

The marking "Top" or "Haut" on the cylinder head gasket must be facing the Cylinder head (upwards).

For gaskets that do not have "top" or "high" markings, but have a manufacturer's part number, orient this part number towards the cylinder head.

If there are no markings (TOP, HIGH, or manufacturer's part number), the gasket does not have a specific orientation.

However, it is still necessary to check the correct positioning of the water and oil passages to ensure proper installation.

For a 4CV, you need 3.10 meters of seal per door, or a total of 12.40 meters for all 4 doors.