Kit of 6 hoses (Rubber) for heating circuit (Complete) - A310.4 (2nd version)

Suitable for:

• A110.1600 VD and VH (SC / SI / SX)
• A310.4 (All models)
• A310 V6 (From number 1 to number 47709)

Segment Characteristics:

• • Segment Diameter:Ø 78mm
  • Thickness of Upper Segments (Fire-resistant): 1.75mm
  • Thickness of Intermediate Segments (Waterproof): 2mm
  • Low ring thickness (Scraper): 4mm

It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values ​​given by the manufacturer or in the instructions provided.or the values ​​given in the instruction manual.

During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.

Dimension of the axis of the upper fixing bolt at the support of the 1st washer 14cm

Dimension of the axis of the upper fixing bolt at the support of the 1st washer

Dimension of the axis of the upper fixing bolt at the support of the 1st washer

Bearing Dimensions:

• Dimension: Original (Standard) Dimension
• Crankpin Diameter (A): Ø 48.00mm
• Housing Diameter (B): Ø 51.60mm
• Bearing Width (C): 21.75mm
• Bearing Thickness (D): 1.77mm
• Smooth, lug-type bearings with no grease holes or grooves
• Bearing Material :Bi-metal

Suitable for:

A310.4: 1600VE n°1066 at the end and 1600VF n°21066 at the end

A310.6: All models (before and after 1980)