Overall length: 23 cm
Fixed to the door with two screws
Out of stock
Bodywork & Exterior Accessories 4CV (Page 2 sur 2)
Upright height: 30cm
Sold individually
In stock
For interior door, sold in pairs (right and left)
In stock
In stock
Out of stock
Out of stock
In stock
For a 4CV, you need 3.10 meters of seal per door, or a total of 12.40 meters for all 4 doors.
In stock
Black polyurethane adhesive for rubber seals
High adhesion, temperature resistant up to 90°
In stock
In stock
In stock
Pad Dimensions:
Pad Insert Diameter: Ø 18mm
Suction Cup Diameter: Ø 80mm
Pad Height: 26mm
Material: Rubber
Out of stock
Diamètre du miroir : Ø 10.5cm
Hauteur de tige : 9cm
Largeur de la pince entre les caoutchouc : 7mm
Out of stock
This headlight is designed to accept an original bulb holder secured with a quarter turn (with lugs)
Outer diameter of the lens (overall): Ø 150mm
Diameter of the lens inside the trim: Ø 145mm
Sold complete with...
In stock
This headlight is designed to accept a European low-cost round-base bulb (P45T)
Outer lens diameter (overall): Ø 150mm
Glass diameter inside the trim: Ø 145mm
Sold complete with chrome headlight dish, concave lens,...
In stock
This headlight is designed to accept a European code bulb with a round base (P45T)
Inner diameter of the dish for fitting the lens: Ø 150mm
In stock
In stock
Inner diameter: 145mm
Outer diameter: 180mm
Height: 27mm
With top mounting clips
Sold individually
In stock
In stock
In stock
In stock
In stock
In stock
Out of stock
Sold as a pair: Right + Left (Red gaskets included)
Mounts to the backing plate via a screw (Bulb holder plate not included)
Renault OE Ref.: 8518462 + 8518463
Suitable for:
4CV (Early model): From start of...
In stock
In stock
Bulb holders with sockets sold as a pair: Right + Left
Sold without bulbs
Out of stock
Pair of tail light lenses (Right & Left) with gaskets – 4CV (2nd model – From 07/1955) / Alpine A106
Sold as a pair: Right + Left with grey seals
Mounts to the backing plate via two screws (bulb holder and screws not included)
Renault / Alpine OE Ref.: 8544934 + 8544933
Suitable for:
4CV (2nd model): From 07/1955...
In stock
Seals sold in pairs: Right + Left
Grey color
Suitable for:
4CV (2nd model): From 07/1955
Alpine A106
In stock
Bulb holders with sockets sold in pairs: Right + Left
Sold without bulbs
Suitable for:
4CV (2nd model): From 07/1955
Alpine A106
In stock
In stock
In stock
In stock
Mounting with AVP4981 screws
In stock
Out of stock
Comes with mounting flange
Suitable for exhaust pipes: Ø 30.5mm (maximum)
In stock
Circle diameter: Ø 50mm
Sticker on transfer paper, ready to apply
Round sticker with a white background, allowing you to add your own numbers for competition use.
Supplied without numbers.
Apply to doors, hood, or...
In stock
Transforms rust into a stable, black layer
Essential for inaccessible bodywork corners
Apply neat and with a brush to all rusty surfaces
In stock
Delivery in France only
Product for stripping most varnishes and paints such as polyurethane, epoxy, glycerophthalic, cellulose, etc.
In stock
Textured paint is a two-component, structured coating based on organic wax.
This high-performance texturizing agent provides optimal resistance to abrasion and rubbing and increases film hardness.
Once the hardener...
In stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
Out of stock
Epoxy paint designed for the anti-corrosion protection of steel components in car chassis, motorcycle frames, wheels, inner fenders, floorboards, brake calipers, wishbones, brake drums, and suspension springs....
In stock