- Need x7 staples per plate surround
In stock
Set of 4 exterior window scraper seals (front and rear) – rubber and metal – R8 (post-1965) / R8G / R10
Reference:
4909
- Kit consisting of 2 front door seals and 2 rear door seals
- Front door attachment using AVP4910 clips (not included)
- Rear door attachment using sheet metal screws (not included)
- Renault OE Ref.: 0830807100 + 0830807200 + 0830040500 + 0830040400
Suitable for:
- R8 Pre-1965 models (R1130 / R1132): Rear door
- R8 1965 models onwards (R1132 / R1136): Front and rear doors
- R8G (R1134 and R1135): Front and rear doors
- R10 (R1190 / R1192): From chassis no. 110510 for front doors; all models for rear doors
€79.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
You may also like
Ideal for securing:
- Headlining
- Interior trim, carpets, rugs, ...
- Rubber mats
In stock
Ideal for securing:
- Headlining
- Interior trim, carpets, rugs, ...
- Rubber mats
In stock
 – rubber and metal – R8 (post-1965) / R8G / R10&media=https://www.arnaudventouxpieces.com/11663-large_default/exterior-window-seal-kit-for-the-four-doors.jpg){kind=link}
Customers who bought this product also bought:
- Bleed screw diameter: M10x100
In stock
- Angled hose outlet: Ø 3/8" - 24UNF(Ø 9.52mm)
Suitable for:
- 4CV: Right Front Brake (Early 1956 to Late)
- Dauphine / Floride : Left Front Brake
- R8 (drum brake): Left Rear Brake
In stock
Bearing Dimensions:
- Dimension: Stock dimension (Standard)
- Journal Diameter (A): Ø 46.00mm
- Housing Diameter (B): Ø 49.89mm
- Bearing Width (C): 24.50mm (x4)
- Bearing Width (C): 19.50mm (x6)
- Bearing Thickness (D): 1.92mm
- Smooth, lug-type bearings with grease holes (x5) and grooves (x5)
- Bearing material: Bi-metal
In stock
- Fuel pump with priming lever
- Inlet and outlet pipe diameter: Ø 6mm
- Supplied with a paper gasket
- Suitable for Ventoux, Billancourt, and Cléon engines.
In stock
In stock
In stock
- Water pump support with thread ( M18x150 ) for mounting a thermistor or a thermal contact
- Delivered without seal
- Adaptable support for mounting on R8 Major provided that the two nozzles are made for cooling the carburettor.
In stock
The kit contains:
- 4 x 8mm smooth-bore screws - M8 thread (to be positioned on the wheel side)
- 4 x 8.4mm smooth-bore screws - M8 thread (to be positioned on the body or chassis side)
Alpine / Renault OE Ref: 0706289800 / 0706290200
A kit is required to equip both front wishbones of a car
In stock