SEV igniter head vertical outlet - internal Ø 54mm

• This ignition harness consists of4 spark plug wires and 1 coil wire.
• We would like to point out that our spark plug wires are made with Ø 7 mm silicone wires, black in color, with a standard copper core (wire material), which indicates that they do not have interference protection.
• If the vehicle is equipped with sensitive electronic accessories, such as Radios, tripmasters, monitors, or certain electronic ignition kits may cause interference or disruption.

Bearing Dimensions:

• Dimension: Stock dimension (Standard)
• Journal Diameter (A): Ø 46.00mm
• Housing Diameter (B): Ø 49.89mm
• Bearing Width (C): 24.50mm (x4)
• Bearing Width (C): 19.50mm (x6)
• Bearing Thickness (D): 1.92mm
• Smooth, lug-type bearings with grease holes (x5) and grooves (x5)
• Bearing material: Bi-metal

Provide a shaft extension on the igniter drive pinion side, possibility of making it with the old pump shaft (provide about 28mm)

• The hose outlet is oblique: Ø 3/8" - 24UNF(Ø 9.52mm)

Suitable for:

• 4CV: Front Left Brake (From early 1956 to late 1956)
• Dauphine / Floride : Front Right Brake
• R8 (Drum Brake): Rear Right Brake

These twin-tube hydraulic adjustable shock absorbers are designed for versatile use, such as sporty driving.

With an adjustable damping range from softest to firmest,they are perfect for performance driving, sporty riding, or competition, while also offering the comfort and safety needed for everyday use.

Features:

• Mounting eye width: 21mm
• Lower mounting eye inner diameter: Ø 9mm
• The internal adjustment allows you to modify the rebound damping of the shock absorber.
• Shock absorbers delivered at minimum setting (fully open, i.e., softest)
• Shock absorbers sold in pairs

Suitable for:

• R8.G (R1134 / R1135) from 10/1964 to 1974
• Alpine A110 (All models): 1100cc / 1300cc / 1600cc / SX (With Alpine A310 rear axle)
• Alpine GT4 / Matradjet

Detailed description of Koni shock absorbers, see below