Sold complete with teat (inside Ø 6mm), insert, support and cap.
In stock
Juvaquatre braking
Our Renault Juvaquatre brake spare parts
Discover here a wide choice of parts to restore and ensure the proper functioning of the braking system of your Juvaquatre
Whether you are looking for wheel cylinders, hoses, master cylinders, brake discs, original brake calipers, big brake calipers, lockheed, reservoir, connector, stop switch, repair kit, copper brake circuit .... at AVP, Arnaud Ventoux Pièces, you will find everything you need to bring your old car back to life with quality components.
- Sold complete with support, brass cap, insert and rubber teat
- Jar mounted with rubber teat Ø 6mm
In stock
In stock
In stock
In stock
In stock
Sold in 1ml lengths
In stock
Suitable for:
Juvaquatre (All models): 6CV / Van 250kg and 300kg / Estate
Juvaquatre (R2100): 4CV
Dauphinoise (R2101): 4CV
Frégate (All models)
OE Renault Ref: X-9 844 007 / 58.168
In stock
Mounts with the stop switch reference 4423
In stock
In stock
Connection:Male / Male: Ø 11/16"-16UNF (Ø 17.16mm)
Length:42cm (Overall)
Suitable for:
4CV:(From early 1946 to early 1951)
Juvaquatre (1st model):From early to 06/1954 (Except R2100 / R2101)
OE Renault /...
In stock
Connection: Male / Male: Ø 11/16"-16UNF (Ø 17.16mm)
Length (Overall): 470mm
Sold individually
OE Renault Ref: X-8119366 / 58.322
Suitable for:
Juvaquatre (1st model): From the beginning to 06/1954 (Except R2100 /...
In stock
Male Hose End: Ø 3/8"-24UNF (Ø 9.52mm)
Female Hose End: Ø 3/8"-24UNF (Ø 9.52mm)
Overall Length: 480mm
Sold individually
Suitable for Juvaquatre (From 06/1954):
Juvaquatre (R2100): 4CV
Dauphinoise (R2101): 5HP
In stock
Wheel cylinder diameter: Ø 28.58mm (1" 1/8)
Female connector: Slanted / Ø 3/8" - 24UNF (Ø 9.52mm)
Mounting center distance: 36mm / M6 screw
Wheel cylinder width: 73mm
Suitable for:
Juvaquatre (R2100): 4CV...
In stock
Wheel cylinder diameter: Ø 28.58mm (1" 1/8)
Female connector: Slanted - Ø 3/8" - 24UNF (Ø 9.52mm)
Mounting center distance: 36mm / M6 screw
Wheel cylinder width: 73mm
Suitable for:
Juvaquatre (R2100): 4CV...
In stock
Wheel cylinder diameter: Ø 25.4mm (1")
Female connector: Under the bleed screw - Ø 3/8" - 24UNF (Ø 9.52mm)
Mounting center distance: 36mm / M6 screw
Wheel cylinder width: 69mm
Suitable for:
Juvaquatre (R2100): 4CV...
In stock
Ideal for degreasing all your braking elements or other mechanical parts.
In stock
In stock
Delivery in France only
Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted...
In stock
In stock
In stock
Suitable for taps: M3 to M10
Short tap holder - Length 85 mm
Reversible ratchet: Left-hand, right-hand, and fixed ratchet
Two-jaw steel grip
In stock
UNF thread tap (2B tolerance): Ø 3/8"-24 UNF (Right-hand thread)
Tap length (Overall): 63 mm
Mounting drive: 5.5 mm square
Flat end tap, suitable for: Through and blind holes
Machine tap: Only one tap is needed to...
In stock
Suitable for die outer diameter: Ø 38.1mm
Die height: 12.7mm
Two-arm die holder made of high-quality steel
In stock
ISO standard metric die: M10x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 13.1 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
ISO standard metric die: M12x125 (Fine thread - Right-hand thread)
Die outer diameter: Ø 38.1 mm
Die height: 12.8 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel /...
In stock
Suitable for die outer diameter: Ø 30mm
Die height: 10mm
Two-arm die holder made of high-quality steel
In stock
UNF die, DIN223 standard: Ø 3/8"-24 UNF (Right-hand thread)
Outer diameter of the die: Ø 30 mm
Die height: 11 mm
Suitable for the following materials: Soft steel / Hard steel / Cast iron / Stainless steel / Aluminum...
In stock