In stock
Paper gasket between timing plate and engine block - Type 800-01 / 680-02 - Ref 0428695100
Reference:
4L-049
For R4 / 4L:
Billancourt engine / Type 800-01:
- From serial number 189360 -> serial number 189409
- From serial number 207571 -> serial number 207710
- From serial number 207837 -> serial number 336902
- From serial number 337140 -> serial number 361000
- From serial number 361101 -> serial number 361943
- From serial number 362094 -> serial number 409182
Billancourt Engine / Type 680-02:
- From serial number 363855 -> serial number 693300
- From serial number 693305 -> serial number 693334
- From serial number 693635 -> serial number 698330
- From serial number 698381 -> serial number 701643
€7.50
(tax incl.)
Order before 1pm and enjoy same day shipping !
You may also like
Customers who bought this product also bought:
In stock
In stock
In stock
Segment Characteristics:
-
- Segment Diameter:Ø 58mm
- Thickness of Upper Segments (Fire-resistant): 1.75mm
- Thickness of Intermediate Segments (Waterproof): 2mm
- Low ring thickness (Scraper): 3.5mm
It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values given by the manufacturer or in the supplied instructions.or the values provided in the instruction manual.
During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.
In stock
Installation orientation: The end with the two closest-spaced holes is installed on the inspection plate side (opposite the water pump).
Tube orientation: The holes must be aimed towards the valve seats at a 30° angle from the vertical.
- Tube outer diameter: Ø 14mm
- Tube length (overall): 325mm
- Material: Stainless steel
- Renault OE Ref.: 5522581 / 0555258100 / 0555465300
In stock
Cylinder head gasket specifications:
-
- Crimping diameter: Ø 59.7mm
- Cylinder head gasket thickness:1.40mm
Installation direction:
The marking "Top" or "Haut" on the cylinder head gasket must be facing the Cylinder head (upwards).
For gaskets that do not have "top" or "high" markings, but have a manufacturer's part number, orient this part number towards the cylinder head.
If there are no markings (TOP, HIGH, or manufacturer's part number), the gasket does not have a specific orientation.
However, it is still necessary to check the correct positioning of the water and oil passages to ensure proper installation.
In stock
