Engine cooling hose: Connecting tube between the cylinders / Rear tapping on the right cylinder head - Ref 7910246594

• This harness uses the color codes of the original wires and terminals
• Harness sold with installation plan, all connectors are identified and labeled
• Harness for mounting with original terminal boxes or modern fuse box (Type AVP8717, Not supplied with the harness)
• Harness equipped to allow the mounting of a cooling radiator at the front or rear

Suitable for:

• Boxes 367-05 / 367-11
• Boxes 369-02 / 369-04 / 369-07 / 369-09 / 369-10 / 369-15
• Box UN1

Kit contents:

• Gearbox mounting studs (x4): M10x50mm
• Crossmember mounting bolts (x8): M8x40mm
• Aluminum spacers for under the gearbox bracket (x2): Thickness 6mm / Hole spacing 65mm
• Aluminum spacers for under the crossmember (x4): Thickness 6mm / Hole spacing 40mm

Cap Dimensions:

• Inner Diameter: Ø 40mm
• Outer Diameter: Ø 42mm
• Height: 26.5mm

Also suitable for some R16 (R1150) models with rear drum brakes.

• This ignition lead set consists of 6 spark plug wires and 1 coil wire.
• Please note that our spark plug lead sets are manufactured using black, 7mm-diameter silicone wires with a standard copper core; this means they do not feature radio interference suppression.
• If the vehicle is equipped with sensitive electronic accessories—such as a radio, rally computer, monitor, or certain electronic ignition kits—interference or signal disruption may occur.