Rubber sleeve for brake caliper support

Bellows attached to the gearbox output and the control rod, designed to protect the control joint from dirt and road spray.

Bellows dimensions:

• Inlet diameter: Ø 26mm
• Outlet diameter: Ø 20mm
• Length at rest: 80mm
• Renault OE Ref.: 6055955 / 6031398

• Sheet Dimensions: Length 58cm x Width 35cm
• Sheet Thickness: 0.8mm
• Ideal for making carburetor gaskets, fuel pump gaskets, engine and gearbox gaskets (Parts subject to low temperature or pressure). Suitable for all other types of flat gaskets, except those in contact with vapors, up to a temperature limit of 120°C.
• Material made of fiber paper

Delivery in France only

• Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted in the spring.
• DOT 5 approved (not to be confused with DOT 5.1)

Directions for use:

• Before using this brake fluid, your system must be thoroughly bled, rinsed with rubbing alcohol, and dried.

• For filler necks with 1/4-turn locking tabs inside
• Sold with cork gasket

To turn on a temperature warning light

Trigger temperature 97°C