Engine support the pair

• Heat-resistant, ready-to-use sealing paste
• To be applied before mounting the exhaust pipe at the assembly point. Does not seize, facilitates disassembly
• Tube of paste: 150gr
• PLEASE NOTE: This product can only be delivered to France.

• The kit contains the following studs: M6x25 x3pcs (Ref 1016060256) + M6x30 x2pcs (Ref 1016060306) + M6x45 x1pcs (Ref 7059146)
• Only for water pumps with 7 mounting holes

Segment Characteristics:

• • Segment Diameter:Ø 55.8mm
  • Thickness of Upper Segments (Fire-resistant): 2mm
  • Thickness of Intermediate Segments 1 (Waterproof): 2mm
  • Thickness of intermediate rings2 (Sealing): 2mm
  • Thickness of lower rings (Scraper): 3.5mm

It is essential to check the ring end gap of each ring before installing them on the pistons, according to the valuesgiven by the manufacturer or data in the supplied instructions.

During assembly, the piston ring gaps must be evenly distributed around the piston circumference at 120° intervals.

Suitable for (Engine type 662 / 668 / 670 / 670-3):

• 4CV / Dauphine
• Estafette / Juvaquatre

Identical to Ducellier: 566 / 4054 / 4037

Replaces SEV Marchal distributor K4 A46, RB U4VA (SEV Junior)

Curve designed for unleaded fuel with octane SP95 / SP98

• Mounting center distance: 44.5mm
• Thickness: 5mm