Left water pump outlet rubber hose (90° elbow) - Ø 32mm to Ø 45mm - Ref 6000002153

Diamond Dimensions:

• Height: 26.5mm
• Width: 20mm
• Two mounting pins: Ø 3mm
• Mounting center distance: 18mm

Suitable for: Alpine A110 (From late 1973): V85 / SC / SI / SX)

Alpine OE Ref: 6000051624

• This kit contains an M9 adjustment screw nut and an M8 nut.
• Kit sold with a strong Ø 38mm square gasket and a weak Ø 38mm gasket.
• The supply of these two seals allows you to install the most suitable seal depending on the wear of the caliper grooves.
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same type of seal (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have Calipers of different origins, some of which may have square joints and others round joints.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of skewing during braking.

Suitable for:

- Front brake for "Big front brake" type mounting: A110/R8G

- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G

- Front brake: A310.4 (from chassis n°910 to end of series)

- Front brake: R16.TS

Suitable for:

• A110.1600 SC / SI (VD) / SX (VH) / A310.4 : Upper and lower rear wishbone
• R12.G : Lower front wishbone, central rear wishbone

Self-locking washer:

• Inner diameter: Ø 2.5mm
• Outer diameter: Ø 8.5mm

Thickness 1.5mm