Two-piece rear bonnet seals (x1 in U and x1 straight) - R8G

Lift Features:

• Double-acting gas strut
• With rear window defroster lugs
• Mounting center distance: 430mm
• Lift stroke: 180mm
• Mounting eye diameter: Ø 8mm (x2)
• Alpine OE Ref: 6001015967 / 6001015968 / 6001017009 / 6001017010
• Sold individually

Lifts must be mounted with the rod down, with the trunk or hood closed.

In most cases, it is not possible to compress the cylinder by hand due to its strength.

Suitable for (Engine Type: 688 / 689 / 810):

• R4 / R6 / R8
• Caravelle - Matra jet
• R12.TL - R12.TS - R15.TL
• A110.V85 (810) - A110.GT4

For Ducellier reference: 4045 - 4069 - 4074 - 4075 - 4077 - 4118 - 4119 - 4125 - 4143 - 4144 - 4146 - 4150 - 4158 - 4167 - 4168 - 4223 - 4224 - 4225 - 4341 - 4375 - 4387 - 4388 - 4462

Curve designed for unleaded fuel octane SP95 / SP98

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same seal type (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different manufacturers, some with square seals and others with round seals. round.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of calipers slipping when braking.