Stainless steel wiper blade - length 28cm

• This kit contains an M9 adjustment screw nut and an M8 nut.
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• The "square" symbol indicates the presence of a square seal, while the circle symbol indicates the presence of a round seal.
• It is essential to replace the same type of seal (round or square) according to the symbol on the caliper.
• We recommend that you Check the symbol displayed on each caliper, as a vehicle may have calipers of different origins, some with square joints and others with round joints.
• It is not recommended to mix calipers on the same assembly, as this can lead to the risk of skewing during braking.

• License plate light bulb
• Culot 1 Plot / lined up lugs
• Dimensions: 18X37mm
• Due to the multitude of bulb types used, please check compatibility with your vehicle.

• This Ducellier distributor, without a vacuum capsule, uses the original curve of the Ducellier 4137A distributor, except for the absence of a socket for a mechanical rev counter.
• Advance curve in "Distributor revs": 2° at 350 rpm / 5° at 800 rpm / 11° at 1400 rpm
• To measure engine revs on the vehicle,multiply the revs and degrees by x2.
• The curve of this distributor is adapted to SP98 gasoline.
• Ideal for engines prepared with Kit 904cm³.

4CV: Drum brake (From 06/1953 until end of series)

Alpine A106: Drum brake

Dauphine (All models): Disc brake

Caravelle / Florida: Disc brake

R10 / R8 (All models): Disc brake

Alpine A110 and GT4: Disc brake

Matradjet: Disc brake 

This kit contains x4 hoses Ø 3/8"-24UNF - Length of hoses 32cm and 26cm