Rear Brake Caliper Piston - Ø 36mm

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round joint, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square joint, while a circle symbol indicates a round joint.
• It is essential to preserve and replace the joint that originally came with the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different origins, some with square joints and others with round joints.
• It is not recommended to mix calipers on the same axle, as this can lead to the risk of them slipping during braking.

• Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
• Compatible with coils AVP4708 and AVP4715
• Compatible for Ducellier igniter with an internal body diameter of Ø 58.8mm
• Not suitable for an igniter with externally adjusted breakers (different plate fixing points)
• 12V electronic ignition kit, with magnetic trigger which allows the elimination of the breakers and the capacitor
• Notice included
• Supplied with 3 screws for fixing the plate
• Instructions included

• • Mounting hole spacing: 36mm
  • Hose fitting: x1 Ø3/8" - 24UNF (recessed cone)
  • Hose fitting: x1 Ø3/8" - 24UNF (external cone)
  • Renault OE part number: 7700509913 / 7700526087 / 7700547124
  • Bendix original part number: L 631269

Suitable for:

• • R12 (All models)
  • R15  (All models)
  • R17 (All models)

Suitable for the following gearboxes:

• • 5-speed gearbox A110 / A310.4: Gearbox 365-00 / 365-02 / 365-05 / 365-10 / 365-20 / 365-33
  • Gearbox R12 / R12G / R15 / R17 / R17G: Gearbox 352 / 365 / 395
  • 5-speed gearbox R5 Alpine: Gearbox 385
  • Original Renault OE reference: 7700554257 / 0556231900

Output shaft seals The differential nuts (36x54x11mm diameter) are interchangeable, whether with or without a metal cage, and with or without felt; this does not require any modification to the differential nuts.