- Suitable for all 13-inch 3-piece modular rims (Except the GOTTI No. 7 rim)
- Must be used with the G004 fiber seal carrier
- Sold individually
In stock
Fiber seal holder for GOTTI 13" rim
Reference:
G004
- Suitable for all 13-inch 3-piece modular rims (Except the GOTTI No. 7 rim)
- Material: Fiber-reinforced
- Sold individually
€30.00
(tax incl.)
Order before 1pm and enjoy same day shipping !
You may also like
Suitable for GOTTI rims with 6mm diameter mounting holes.
Kit includes:
- 35mm screws x12
- Aluminum cleats x12
- Washers under nuts x12
- Nuts x12
Note: Not suitable for GOTTI No. 7 rims
In stock
- Suitable for GOTTI rims with bolts measuring 35mm under the head and 6mm in diameter.
- Specific treatment and hardness
- Tightening: 16 Nm
In stock
- Suitable for GOTTI rims with Ø 6mm bolts (except GOTTI rim No. 7)
- Zinc-plated steel washer to be positioned on the nut side
In stock
- Suitable for GOTTI rims with 6mm diameter bolts
- Cleat to be positioned on the screw head side
In stock
- Suitable for GOTTI rims with 6mm diameter bolts
- Self-locking nut in reinforced steel
In stock
Customers who bought this product also bought:
- Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
- Compatible with coils AVP4708 and AVP4715
- Compatible for Ducellier igniter with an internal body diameter of Ø 58.8mm
- Not suitable for an igniter with externally adjusted breakers (different plate fixing points)
- 12V electronic ignition kit, with magnetic trigger which allows the elimination of the breakers and the capacitor
- Notice included
- Supplied with 3 screws for fixing the plate
- Instructions included
In stock
In stock
In stock
Also suitable for replacing the M18x150 probe on the AVP4204 water pump bracket
In stock
![](http://pinterest.com/pin/create/button/?url=https%3A%2F%2Fwww.arnaudventouxpieces.com%2Fen%2Fporte-joint-pour-jante-gotti-13-3995.html&description=Fiber seal holder for GOTTI 13" rim&media=https://www.arnaudventouxpieces.com/9607-large_default/porte-joint-pour-jante-gotti-13.jpg){kind=link}
- Air intake trumpet/trumpet filters for WEBER 40DCOE carburetor
- Mesh filters made of two layers of stainless steel mesh, with an intermediate filter layer ensuring optimal engine protection
- Easily washable and removable
- Suitable for trumpets with an outer flange diameter between Ø 55mm and 60mm
- Filter inner diameter : Ø 52mm
- Filter outer diameter: Ø 74mm
- The filter length when installed on a 55mm trumpet is 70mm (overall)
- Can be mounted on all the cones in the AVP catalog
In stock