Pair of heating hoses with tapping - R5 Alpine Turbo (122B)

• Allows easy adjustment of the float with one side of the tool calibrated to 5mm and the other to 6mm.
• Allows direct action on the float tab thanks to a slot at the end of the tool

4L: R1128 / R2370 / R2430 from 1976 to 1982

4L: R1128 / R112C / R 210B / R210B / R2370 / R 239B / S128 after 1983

R5

Suitable for:

• R8 / A110: Rear Big Brake Assembly
• R5 Alpine Turbo (122B): Rear Brake
• A310.4: Rear Brake
• A310 V6 (Pre-1980): Rear Brake
• R12G / R17G: Rear Brake

Brake pads with a retaining stop (B in the diagram) must be installed with this stop facing forward (in the direction of wheel rotation).

For competition use only. Do not use these brake pads on public roads.

Rubber seal made from materials with mechanical properties specific to this application.

Suitable for:

• R5 Alpine (R1223) and Alpine Turbo (R122B)
• R5 Turbo (R8220)

Suitable for:

• R5 All models (2nd Version)

Seal dimensions:

• Inner diameter: Ø 22mm
• Outer diameter: Ø 33.3mm
• Height (excluding lugs): 5mm
• Recessed diameter: Ø 25.8mm
• Push button diameter: Ø 21.5mm