Kit of 2 paper seals + 1 carburettor base heat seal Solex - Ø 28mm

• Points set with internal adjusting screw, suitable for distributors with and without vacuum advance
• Brand: Ducellier
• Renault OE Ref: 0854137800 / 608012 / 618701 / 71133 (Ducellier)

• The kit contains the following studs: M6x25 x3pcs (Ref 1016060256) + M6x30 x2pcs (Ref 1016060306) + M6x45 x1pcs (Ref 7059146)
• Only for water pumps with 7 mounting holes

For engine with 4-outlet water pump.

Kit sold without valve stem seals (AVP1012), without copper base seals and without the timing case oil seal (AVP1029).

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round joint, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square joint, while a circle symbol indicates a round joint.
• It is essential to preserve and replace the joint that originally came with the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different origins, some with square joints and others with round joints.
• It is not recommended to mix calipers on the same axle, as this can lead to the risk of them slipping during braking.

Length taken from the axis of the fixing eye to the end of the rod: min adjustment 105mm / max 115mm

• Length under the head of the threaded part: 30mm