Aluminum filler plate for Manolene (plastic) fuel tank, including gasket and mounting hardware.

• Stem Length: 38mm
• Membrane Hole Spacing: 27mm
• Cup Diameter 1: Ø 8.20 mm
• Cup Diameter 2: Ø 10.20 mm

• Glass bowl Ø 67mm
• Filter element: Interchangeable paper cartridge
• One inlet: dual size 6 and 8mm
• One outlet: dual size 6 and 8mm
• Regulation pressure: Regulation range from 0 to 0.6 bar
• Compatible with fuel SP95 / SP98 / E85
• Pressure adjustment via the upper screw which acts directly on the membrane

• 4 spark plug wires + 1 coil wire
• 90° angled coil terminals
• Length of coil cable: 61cm
• Length of 2 spark plug wires: 26.5cm
• Length of 2 spark plug wires: 36.5cm
• We would like to point out that our spark plug wires are made with Ø 7mm silicone wire and a standard copper core (wire material), which means they are not protected against interference.
• If the vehicle is equipped with electronic accessories If you have sensitive equipment, such as a radio, tripmaster, monitor, or certain electronic ignition kits, interference or disruption may occur.

• Intake manifold mounting distance: 70mm and 110mm
• Carburetor mounting distance: 110mm and 70mm
• Flange thickness: 19.3mm
• Pipes diameter: Ø 45mm
• Flanges supplied with O-rings (x4), paper gaskets (x4), and mounting studs (x16)

These rigid aluminum flanges replace the original "flexible" rubber flanges, which tear with wear.

• Useful length (L on photo diagram number 3): 19.5mm
• Sold with the pin
• OE Renault / Alpine Ref: 0705322000