In stock
Kit of 5 fixing studs for 4-outlet water pump - Ventoux engine
Reference:
1076
The kit contains the following studs: M6x25 x2pcs (Ref 1016060256) + M6x30 x1pcs (Ref 1016060306) + M6x45 x2pcs (Ref 7059146)
Suitable for:
- 4CV: Water pumps with 6 mounting holes (2nd model)
- Dauphine: Ventoux engine
- Florida: Ventoux engine
- Alpine A106 and A108
€8.50
(tax incl.)
Order before 1pm and enjoy same day shipping !
You may also like
- The kit contains the following studs: M6x25 x3pcs (Ref 1016060256) + M6x30 x2pcs (Ref 1016060306) + M6x45 x1pcs (Ref 7059146)
- Only for water pumps with 7 mounting holes
In stock
In stock
Customers who bought this product also bought:
Out of stock
-
- Overall length: 304cm
- Sheath length: 294cm
- Cable length: 304cm
Our cables are made in France and meet the assembly and quality standards of original equipment (OEM) cables from automotive manufacturers.
In stock
x1 pot of fine grain 240 lapping paste
x1 pot of coarse grain 120 lapping paste
In stock
- These rocker shafts are direct replacements for the early-model version featuring threaded-end shafts (4CV / Dauphine).
- These two rocker shafts, featuring oil holes, are identical.
- Supplied with 4 clips.
- Shaft length (overall): 146mm
- Shaft outer diameter: Ø 11.95mm
- Material: Steel
- Renault OE Ref.: 6034057 / 6046335 / 0604633500 / 0607562300 / 7700563688
In stock
Segment Characteristics:
-
- Segment Diameter: Ø 54.50 mm
- Thickness of Upper Segments (Fire-resistant): 2 mm
- Thickness of Intermediate Segments (Waterproof):2mm
- Low ring thickness (Scraper): 3.5mm
It is essential to check the ring end gap of each ring before installing them on the pistons, according to the values given by the manufacturer or in the supplied instructions.or the values provided in the instruction manual.
During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.
In stock
- Kit to be used with a coil of primary resistance between 2.5 and 3.5 ohms
- Compatible with coils AVP4708 and AVP4715
- Compatible for Ducellier igniter with an inner body diameter of Ø 58.8mm
- Not suitable for an igniter with externally adjusted breakers (different plate fixing points)
- 12V electronic ignition kit , with magnetic trigger which allows the elimination of the breakers and the capacitor
- Notice included
- Supplied with 3 screws for fixing the plate
- Instructions included
In stock