Front bumper beige - 4L

• Special Premium Quality graphite for clutch release bearings
• Important: The release bearing clamping screw must be placed on the side opposite the fork
• It is possible to keep the release bearing and replace only the graphite ring if worn.
• Depending on the diameter of the return spring, it may be necessary to re-drill the release bearing mounting.
• It is recommended to soak the release bearing in warm engine oil and then wipe it dry before installation to avoid squeaking noises

Suitable for:

Dauphine (All models): Drum brake

Florida / Alpine A108: Drum brake

• It is recommended to perform a dry fit of all body components to ensure proper alignment. Adjustments may be necessary.

Shipping available. Contact us to obtain a transport quote and find out our conditions.

Inlet and outlet Ø 6-8mm

• This Ducellier distributor, without a vacuum capsule, uses the original curve of the Ducellier 4137A distributor, except for the absence of a socket for a mechanical rev counter.
• Advance curve in "Distributor revs": 2° at 350 rpm / 5° at 800 rpm / 11° at 1400 rpm
• To measure engine revs on the vehicle,multiply the revs and degrees by x2.
• The curve of this distributor is adapted to SP98 gasoline.
• Ideal for engines prepared with Kit 904cm³.