- Primary winding resistance: 3.1 ohms
- Coil compatible with electronic ignition kits ref 4798 and ref 4799
In stock
Carburetor cleaner - 300ml
Reference:
C003
- Delivery only in France
€18.50
(tax incl.)
Order before 1pm and enjoy same day shipping !
Eliminates deposits in carburetors, on valves and spark plugs.
A 300 ml can is suitable for max. 70 liters of fuel. Mix the contents of the can with the fuel. Mixing takes place automatically.
Addition intervals
Add to fuel every 2000 km, with long-lasting effect. The fuel tank should be filled at least half to full.
Customers who bought this product also bought:
- 3-tube pump: Inlet - Outlet - Return
- Sold without seal and without thermal wedge
In stock
In stock
In stock
-
The sets are supplied with the following components:
- Liners (x4)
- Pistons (x4)
- Rings (x12)
- Pin (x4)
- Circle clips (x8)
Dimensions of the different parts:
-
- Liner bore diameter: Ø 58mm
- Liner flange or top diameter (D): Ø 73mm
- Liner base diameter (A): Ø 62.50mm
- Overall height including skirts of cylinder liners (C): 126mm
- Height from top of cylinder liner to base seal area (E): 112.80mm
- Panel dimensions: Ø 14x50mm (Cirlip-free mounting)
- Ring thickness: 1.75mm / 2mm / 3.5mm (Fireproof/Sealing/Scraper)
- Base seal type: Copper seal
Piston mounting direction: an arrow drawn perpendicular to the axis of the piston appears on the top of the piston. It must be oriented in the direction of engine rotation during the connecting rod's downward stroke (see manufacturer's instructions or diagram).
It is essential to check the ring end gap of each piston ring before installing them on the pistons, according to the values given by the manufacturer or in the supplied instructions.
During installation, the ring end gap must be evenly distributed around the piston circumference at 120°.
In stock
Out of stock