1600cm³: Brass pipe in “S” shape - Exterior Ø 35mm - Ref 6000001369

Same as original capacity: 38 liters

• For gearbox control shaft Ø 13mm
  
• Suitable for gearboxes: 330-A4 / 353 / 364-05 / 364-06
• OE Renault Ref: 98079333 / 0980793300 / 7701455390 / 7701501597

A110.V85

• This kit contains an M9 adjustment screw nut and an M8 nut
• To identify a caliper with a square or round seal, refer to the symbol indicated on the caliper casting.
• A square symbol indicates a square seal, while a circle symbol indicates a round seal.
• It is essential to replace the same seal type (round or square) according to the symbol on the caliper.
• We recommend checking the symbol displayed on each caliper, as a vehicle may have calipers from different manufacturers, some with square seals and others with round seals. round.
• It is not recommended to mix calipers on the same set, as this can lead to the risk of calipers slipping when braking.

• Intake manifold mounting distance: 70mm and 110mm
• Carburetor mounting distance: 110mm and 70mm
• Flange thickness: 19.3mm
• Pipes diameter: Ø 45mm
• Flanges supplied with O-rings (x4), paper gaskets (x4), and mounting studs (x16)

These rigid aluminum flanges replace the original "flexible" rubber flanges, which tear with wear.

• Distance between two pulley mounting screws: 30mm
• Pulley is secured using 3 M7 screws (not supplied)
• The heater outlets can be plugged using two 16mm diameter rubber plugs and one 10mm diameter plug
• Water pump sold with water pump gasket, plate gasket, bleed plate, and bleed screw