Slanted hose outlet: Ø 3/8" - 24UNF (Ø 9.52mm)
Suitable for:
4CV: Right Front Brake (Early 1956 to Late)
Dauphine: Left Front Brake
R8 (drum brake): Right Rear Brake
In stock
Braking R8 / R8S / R8G (Page 2 sur 2)
The hose outlet is angled: Ø 3/8" - 24UNF (Ø 9.52mm)
Suitable for:
4CV: Left Front Brake (From early 1956 to late 1956)
Dauphine: Right Front Brake
R8 (Drum Brake): Right Rear Brake
In stock
Come with x3 aviation brake hoses to replace copper pipes
In stock
In stock
This hose kit can be fitted to both front (Ø 48mm) and rear (Ø 48mm) calipers with a hydraulic handbrake, provided the banjo bolts on the rear brake fittings are replaced with two Ø 3/8"-24UNF bolts.
The kit comes...
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
It is mandatory to change the calipers in pairs (Right and left caliper)
In stock
Suitable for:
R8 / A110: Rear Brake (Big Brake Mounting Type)
A310.4 (All Models): Rear Brake
A310.6 (Before 1980): Rear Brake
In stock
Shim sold individually, 2 shims required to equip a front axle.
In addition to the aluminum shim for attaching the front caliper, a caliper yoke is required (not available in the AVP catalog)
WARNING: This assembly...
In stock
Washer sold individually
One washer allows the centering of a brake disc on the pivot
2 washers are required to equip a front or rear axle.
In stock
Kit includes: 4 screws, 8 washers, and 4 nuts
This kit allows you to install an aluminum shim on the pivot (right or left),
2 kits required per vehicle.
In stock
Suitable for:
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front...
In stock
Suitable for:
- Front brake for "Big front brake" type mounting: A110/R8G
- Rear brake for "Big Rear brake" type with hydraulic handbrake: A110/R8G
- Front brake: A310.4 (from chassis n°910 to end of series)
- Front...
In stock
Suitable for:
R8 / A110: Front Brake (Big Brake Assembly)
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R12 (All models) / R15TL: Front Brake
R16(L / TL / TS ) / R16TX (2nd assembly): Front Brake...
In stock
In stock
Suitable for:
R8 / A110: Front Brake (Big Brake Assembly)
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front Brake
R12 (All models) / R15TL: Front Brake
R16(L / TL / TS ) / R16TX (2nd assembly): Front Brake...
In stock
Convient pour:
R8 / A110: Frein Arrière (Montage Type gros frein)
A310.4 (Tous modèles) : Frein Arrière
A310.6 (Avant 1980) : Frein Arrière
In stock
Suitable for:
R8 / A110 : Rear Brake (Big Brake Type Mounting)
A310.4 (All Models) : Rear Brake
A310 V6 (Before 1980) : Rear Brake
In stock
Suitable for:
R8 / R8G / A110 : Front or rear disc (Big brake assembly)
A110 1600 SX (VH) : Front or rear disc
R16 (L / TL / TS) / R16TX : Front disc
A310.4 (No. 910 at the end of the series): Front disc
A310 V6 -...
In stock
In stock
Suitable for:
R8 / A110: Front big brake assembly
R5 Alpine Atmo (1223) and Alpine Turbo (122B): Front brake
A310.4: Front brake
A310 V6 (Before 1980): Front brake
R12 (All models): Front brake
R15 / R16 / R17 (All...
In stock
In stock
Suitable for:
R8 / A110: Rear Big Brake Assembly
R5 Alpine Turbo (122B): Rear Brake
A310.4: Rear Brake
A310.6 (Pre-1980): Rear Brake
R12G / R17G: Rear Brake
For competition use only, do not use these pads on public...
In stock
In stock
In stock
Key length: 51mm
Key width: 23.5mm
In stock
Delivery in France only
Does not absorb moisture, thus protecting brake systems from rust, which accumulates on wheel cylinders and destroys the brake pads after a few brake applications when the brakes are restarted...
In stock
In stock
Ideal for degreasing all your braking elements or other mechanical parts.
In stock
In stock
In stock
